1-888-742-9565
 248-324-1800

   sales@argecy.com

Why trust us?
  
  • My Account
  • My Purchase Cart 
  • My Lease Cart
  •   
    Site Map
    Real inventory that we refurbish and stand behind, since 1985.
  • Connectivity
  • Consumables and Supplies
  • Document Scanners
  • IBM Disk and Tape Drive Systems
  • Parts for Printers, MFPs, and Scanners
  • Printers and MFPs
  • Projectors and Whiteboards
  • Service and Repair
  • Software and Applications
  • Special Purchases
  • Thin Clients, Terminals, and Displays
  • Attention Dealers and Repeat customers: Discounts may be available based on your log-in. Call or Email for information.



      


    IBM Infoprint 4247-V03

     
     
     
     


    IBM Infoprint 4247-V03 Printer
    IBM 4247-V03 1100cps Infoprint Impact Printer
    Fully refurbished with 1-year warranty
    4247-V03 With Ethernet
    $1295.00



    IBM 4247-V03 1100cps Infoprint Impact Printer
    Fully refurbished with 1-year warranty
    4247-V03 With Parallel and Serial
    $1295.00



    IBM 4247-V03 1100cps Infoprint Impact Printer
    Fully refurbished with 1-year warranty
    4247-V03 With Ethernet And IPDS
    $1599.00


    Looking for IBM Infoprint 4247-V03 Parts?
    IBM 4247-V03 1100cps


    Feature Code
    Additional Front Tractor (V03)FC4003
    4247 FC4003 Additional Front Tractor (V03)
    Fully refurbished with 90-day warranty
    4247-4003
    $475.00


    Ethernet 10/100 BaseT Nic (ASCII) - InitialFC4270
    4247 FC4270 Ethernet 10/100 BaseT Nic (ASCII)
    Fully refurbished with 90-day warranty
    4247-4270
    $199.00


    Ethernet 10/100 BaseT Nic (ASCII) - MESFC4272
    4247 FC4272 Ethernet 10/100 BaseT NIC (ASCII)
    Fully refurbished with 90-day warranty
    4247-4272 *** Please see FC4270 ***



    Ethernet 10/100 BaseT Nic (IPDS) - Initial
    FC4280

    Ethernet 10/100 BaseT Nic (IPDS) - MESFC4282
    4247 FC4282 Ethernet 10/100 BaseT NIC (IPDS)
    Fully refurbished with 90-day warranty
    4247-4282
    $566.00


    Twinax IPDS (Initial Order)FC4220
    4247 FC4220 Twinax IPDS (Initial Order)
    Fully refurbished with 90-day warranty
    4247-4220


    Twinax IPDS (MES) (customer install)FC4222
    4247 FC4222 Twinax IPDS
    Fully refurbished with 90-day warranty
    4247-4222


    Twinax SCS Attachment (Initial Order)FC4210
    4247 FC4210 Twinax SCS Attachment
    Fully refurbished with 90-day warranty
    4247-4210


    Twinax SCS Attachment (MES) (customer install)FC4212
    4247 FC4212 Twinax SCS Attachment
    Fully refurbished with 90-day warranty
    4247-4212


    Coax SCS Attachment (Initial Order) (NO MES)FC4230
    4247 FC4230 Coax SCS Attachment
    Fully refurbished with 90-day warranty
    4247-4230
    $661.00


    Coax SCS Attachment (MES) (customer install)FC4232
    4247 FC4232 Coax SCS Attachment
    Fully refurbished with 90-day warranty
    4247-4232
    $661.00


    Coax IPDS Attachment (Initial Order)FC4240
    4247 FC4240 Coax IPDS Attachment
    Fully refurbished with 90-day warranty
    4247-4240
    $948.00



    Coax IPDS Attachment (MES) (customer install)FC4242
    4247 FC4242 Coax IPDS Attachment
    Fully refurbished with 90-day warranty
    4247-4242
    $948.00


    Serial Attachment (Initial Order)FC4250
    Serial Attachment (MES) (customer install)FC4252
    6 ft. Power Cord, ChicagoFC9250
    6 ft. Power CordFC9251
    PC Parallel Cable (6 ft.)FC5612
    PC Serial RS-232 (20 ft.)FC9386
    PC Serial RS-422 (50 ft.)FC8652
    1284 Parallel Bidirectional Cable (V03)FC5614
    AS/400 RS-232 Serial Cable (40 ft.)FC4342
    AS/400 RS-232 Serial Cable (100 ft.)FC4346
    RS/6000 RS-232 Serial Cable KitFC3741
    Ntwk Prt Srvr Ethernet 10BaseTFC4164
    30H4054 IBM Lan Ethernet Print Server (NPS)
    Fully refurbished with 90-day warranty
    30H4054 FC4164 With AC Adapter
    $190.00


    12V AC Adapter for US (V03)FC7701
    Printer Stand (V03) (Open)FC4461
    Printer Stand (V03) (Cabinet)FC4462



    4247 Ribbon
    57P1743 4247 V, X, Z Series Printer Ribbon Black 20,000,000 chars
    New
    57P1743 Includes Six Ribbons (New)
    $206.00


    The new IBM 4247-V03 model delivers high-speed, reliable printing for exceptional productivity at an attractive price. The 4247-V03 prints up to 1,100 characters per second and has support for two continuous forms paths. Constructed with durable metal covers to help protect your investment, the 4247-V03 can handle the rigorous printing environments of manufacturing, transportation and distribution industries.

    Highlights

    • Fast, quiet, reliable printing at up to 1,100 characters per second
    • Rugged design for superior durability
    • Two front tractors for reliable paper feeding, automatic forms loading and thickness adjustment
    • Multiple input form paths, including paper parking and linking
    • High-quality printing on up to eight-part forms
    • User-installable and switchable interface cards
    IBM 4247-V03 open
    Easy to use and efficient
    Automatic forms loading, thickness adjustment and selection features make for simple operation of the IBM 4247 printers. The user-friendly operator panel features a 2x40 LCD display for easy-to-read menus and messages. And with the document-on-demand feature, you can eject and then print on the very next form, helping to reduce paper waste.

    Keeping your supply chain up and running
    Supply chain success hinges on achieving high productivity and streamlined costs. Printers help keep your supply chain moving. And a breakdown could mean lost profits and even lost customers. Designed for high output performance in demanding print environments, the IBM 4247 industrial strength printers provide professional reliability at attractive prices. With support for both cutsheet and continuous form paper, the 4247-V03 and 4247-003 are fast and flexible, and can positively contribute to your bottom line.

    Fast speed, high functionality
    With print speeds up to 1,100 cps, and durable metal covers, the IBM 4247-V03 is built to handle rigorous industrial applications. Dual front tractors help ensure paper feeding reliability and enable acceptance of a wide range of paper thicknesses. And the attention light is visible from a distance, so operators are quickly alerted to any problems. The 4247-V03 offers high functionality and performance, so you can consolidate your print applications for lower maintenance and supply costs.

    Adaptable to your business needs
    A powerful dot matrix printing design enables the 4247 printers to print up to eight-part forms. The combination of paper parking, switching and linking can help you maximize your printing options and increase productivity. The all-points-addressable graphics capability enables applications to print bar codes, scanned logos and more. And users can install and switch serial, parallel, twinaxial and Ethernet 10/100 BaseT interface cards to meet network needs now and in the future.

    Maximum Print Speed
    cps (at 10 cpi)

    4247-003
    4247-V03
    Fast draft mode


    1100
    Data processing mode
    700
    800
    DP text mode
    350
    480
    NLQ mode
    175
    240
    Print Options
    13.6 maximum print line
    Vertical spacing6 or 8 lines per inch (lpi) selectable from operator panel for text
    3, 4, 6, or 9 lpi selectable under program control for text
    1/144" increments under program control available for graphics
    Horizontal spacing10, 12, 15, 16.7, 17.1 and 20 characters per inch
    10 cpi in Fast draft mode (4247-V03)
    Proportional spacing is available in DP text and NLQ modes
    Bar codesPostnet, UPC-A, UPC-E, EAN-8, EAN-13, Code 3 of 9, Code 128, Interleaved 2 of 5, Codebar, MSL, Interleaved 2 of 5 and Matrix 2 of 5
    Emulations

    Standard
    Epson FX, IBM Proprinter III XL and IBM 2381 Personal printer
    Optional
    Twinaxial: IBM 4224, 4230
    Twinaxial non-IPDS: IBM 4214, 4230

    Coaxial IPDS: IBM 3268, 4224
    Coaxial non-IPDS: IBM 4230
    Paper Handling
    Support for two continuous forms paths 4247-003: 8-part front, 4-part rear 4247-V03: Dual front tractors. 8- part support for both
    Manual cutsheet w/3-part support (4247-003)
    Optional 1, 2 or 3 bin auto-sheet feeder (4247-003)
    Paper parking, switching and linking
    Automatic forms loading and thickness adjustment
    Push or pull capability (4247-003)
    Paper Sizes
    Continuous forms:

    3" to 17" Width
    3" to 24" length

    Cutsheet forms: (up to 4 -part forms manual feed/three-part auto-feed)

    3" to 15" Width
    5" to 14" Length
    Interfaces
    Serial (RS-232C, RS-422A), Centronics PC Parallel, Twinaxial, Coaxial, Ethernet 10/100 BaseT
    Physical Characteristics
    4247-003
    4247-V03
    Width26.75" (679.5 mm)
    28.4" (720 mm)
    Depth15.6" (658 mm)
    15.7" (400 mm)
    Height12.4" (315 mm)
    13.8" (350 mm)
    Weight45 lbs. (20.4 kg)
    72.6 lbs. (33 kg)
    Environmental Conditions

    Relative Humidity8% to 80% RH (4247-003 and 4247-V03)
    Temperature50 to 105 F (10 to 40.6 C) (4247-003 and 4247-V03); 60 to 90 F (15.6 to 32.2 C) with auto-sheet feed
    Acoustics (Printing in DP text mode)4247-003: 55 dBA 4247-V03: 56.3 dBA

    The IBM 4247 is a heavy-duty serial impact matrix printer capable of printing at speeds of up to 1100 characters per second (CPS) and providing multiple forms paper handling capabilities.

    Model Abstract 4247-V03

    The IBM 4247 Industrial Impact Matrix Printer Model V03 features quiet operation, a full-size operator panel similar to today's Model 003, a workload of up to 64,000 pages per month, print-quality choices of Fast Draft mode, DP mode (DP), DP Text mode (DP Text), and Near Letter Quality mode (NLQ), and versatile paper-handling capability which provides printing on up to 8-part forms. The Model V03 can have either one or two straight continuous-forms paper paths for outstanding paper-feeding reliability. One paper path is standard, and the second path is an optional feature.


    Highlights

    • Quiet operation
    • Exceptional forms handling flexibility
    • Heavy-duty performance - Up to 20 million character per month duty cycle

    Model Highlights 4247-V03

    The 4247 Model V03 offers:

    • Print speed of up to 1100 characters per second (CPS) in Fast Draft mode
    • Rugged design with metal covers for demanding transaction applications
    • A workload capacity of up to 64,000 pages per month
    • Two front paper paths for maximum forms-feeding reliability
    • Internal Ethernet 10/100BaseT adapter for IPDS and ASCII
    • Easy-to-change attachment cards
    • Full-size and full-function 2 line by 40 character operator display
    • Quiet operation (56.3 dBa in DP Text mode)
    • Multiple data-stream emulations to provide easy replacement of older printers
    • OCR support
    • Extensive barcode support


    Description

    The IBM 4247 is a professional industrial impact matrix printer capable of printing at speeds of up to 1100 characters per second (cps) in Fast Draft mode. The Model V03 is a rugged printer with metal covers, and is designed for harsh environments and demanding applications. It is compatible with previous IBM 4247 models and offers user-installable interface cards. Typical applications include transaction processing for invoices, office or internal business documents, as well as barcodes, labels, and multipart forms.

    Support for a Range of Connectivity Options and Hardware Environments

    A parallel port for simplified host attachment capability is standard. Optional attachments include:

    • Ethernet local area network (LAN) attachment through the internal 10/100 BaseT Ethernet adapters for either ASCII or IPDS
    • Coax and twinax SNA Character Set (SCS)
    • Coax and twinax Intelligent Printer Data Stream (IPDS)
    • Token-Ring Types 1 and 3 through Network Print Servers
    • Token-Ring IPDS LAN attachment with the I-Data RPQ 8B4313
    • Serial port for RS-232 or RS-422 attachment

    Environments supported by the 4247-V03 include IBM eServer zSeries, iSeries, and pSeries, IBM AS/400(R), RS/6000(R), S/370, and S/390, IBM PCs, IBM-compatible PCs, non-IBM systems that support ASCII serial and parallel interfaces, and LANs.

    The IBM 4247 Model V03 Printer builds on the strengths of previous models of the IBM 4247 family while providing a Fast Draft mode with a faster print speed.

    Print Speed

    Print speeds (in characters per second) of the 4247-V03 are up to:

    • 1100 cps at 10 characters per inch (cpi) in Fast Draft mode
    • 800 cps in DP mode
    • 480 cps in DP Text mode
    • 240 cps in NLQ mode

    The print speed in lines per minute is up to:

    • 500 lines per minute at 40 characters per line
    • 300 lines per minute at 132 characters per line

    Heavy-Duty, Reliable Printing

    The 4247-V03 is a professional industrial heavy-duty printer with metal covers and a workload capacity of up to 64,000 pages per month. The 18-wire print head provides reliable printing on up to 8-part forms in DP, DP Text, and NLQ print modes.

    Flexible Forms Handling

    The IBM 4247 Printer provides exceptional forms-handling flexibility. The base printer includes one continuous-forms tractor path, and a second continuous-forms front tractor paper path is optional. No rear tractor path is available.

    This dual front paper path capability can translate into a single printer performing work that formerly required two or more printers. Users can load different forms into each tractor path and then enable the path that corresponds to the desired print job.

    Print Quality Comparison

    Fast Draft is a print quality for the IBM 4247 that is available only on the Model V03. The Data Processing (DP), Data Processing Text (DP Text), Near Letter Quality (NLQ), OCR-A, and OCR-B print qualities on the 4247-V03 are equivalent in character size, shape, and resolution to the print qualities available on the 4247 Model A00, 001, 002, and 003 printers.

    The following table summarizes the print quality for Fast Draft, DP, DP Text, and NLQ.

                              DPI               Cell Size (Dots)
    Print --------------------- ---------------------
    Quality Horizontal Vertical Horizontal Vertical
    ---------- ---------- -------- ---------- --------
    Fast Draft 45 72 9 9

    DP 60 72 12 9

    DP Text 100 72 20 9

    NLQ 100 144 20 18

    Operator Panel

    The 4247-V03 includes the same full-function, full-size operator panel as today's Model 003. It includes a 2 line by 40 character display, making messages and menus easy to understand.

    Printer Data-Stream Emulations

    Emulation modes to easily replace many older printers include:

    • ASCII emulation for the IBM Proprinter III XL, IBM 2381 Personal Printer, and Epson FX printers
    • Coax emulations for the IBM 3268, IBM 3287, IBM 4224, and IBM 4230
    • Twinax emulations for the IBM 4214, IBM 4224, and IBM 4230

    In addition, native IBM 4247 mode is selectable with each attachment.

    Parallel Attachment

    The IBM 4247 Model V03 base printer includes a parallel port as standard. For the parallel port:

    • Printers emulated are Proprinter III XL, IBM 2381 Personal Printer, and Epson FX80 - 1170.
    • Data streams supported are PPDS and Epson FX.

    Optional Twinax and Coax SCS Attachment Features

    The optional Coax SCS Attachment:

    • Emulates the IBM 3268/3287, IBM 4224, and IBM 4230 as well as providing native support for the IBM 4247
    • Supports 3270/DSC/DSE and SCS data streams

    The optional Twinax SCS Attachment:

    • Emulates the IBM 4214 and IBM 4230
    • Supports the PDS data stream

    Each attachment also supports native IBM 4247 mode.

    Optional Twinax and Coax IPDS Attachment Features

    With the Coax IPDS Attachment (#4240, #4242) and Twinax IPDS Attachment (#4220, #4222), the 4247-V03 can be driven by Advanced Function Presentation (AFP(TM) applications supported by Print Services Facility (PSF(TM)) and GDDM(R).

    Optional Ethernet LAN Attachment Capability

    Ethernet 10/100 BaseT Ethernet LAN attachment for either ASCII or IPDS is provided via the Ethernet adapters (#4270, #4272 for ASCII and #4280, #4282 for IPDS)

    These adapters:

    • Provide a fully integrated 10/100 BaseT Ethernet solution
    • Are easier to configure than previous 4247 Ethernet offerings

    The IPDS adapter replaces the Ethernet I-Data RPQ (RPQ #8B4314), and can be used for either IPDS or ASCII.

    With either adapter, the 4247 parallel port is available. (The older ASCII Ethernet adapter, #4260, #4262 utilize the parallel port so that it is not available.)

    Hot interface and hot port switching:

    • ASCII Parallel and ASCII LAN hot interface switching is supported
    • ASCII LAN TCP, LPR,Telnet,and FTP hot port switching is supported
    • Hot port switching between the IPDS LAN port and ASCII LAN ports is not supported. Manual switching between IPDS and ASCII is required to switch between these ports.

    Protocols Supported by the Ethernet 10/100 BaseT Adapters

    The following protocols are supported by the Ethernet 10/100 BaseT adapters (feature numbers 4270, 4272, 4280, and 4282):

    • Ethernet II, SNAP, 802.2, 802.3 and following
    • TCP/IP (UDP, ARP, RARP, ICMP, PING, BOOTP, DHCP, FTP, PSF/AFP IPDS)
    • SMB/NetBIOS
    • SMTP
    • LPR/LPD
    • Direct Socket Printing
    • HTTP

    Loading Network Configuration Settings

    The network configuration protocol and security settings can be set either from the Operator Panel or from a Web Browser. Detailed information is contained in the 4247 Ethernet NIC Installation Guide (G544-5480).

    Microsoft Windows Print Drivers

    Print Drivers for Microsoft Windows 95, 98, Me, NT, 2000, and XP are shipped on the CD-ROM included with these features.

    Current 4247 Network Print Server and IPDS LAN Attachment Capability

    These Ethernet adapters provide a fully integrated Ethernet solution and normally will be the preferred Ethernet adapters.

    Other LAN attachment capability is available via:

    • The Network Print Server features (#4121, #4124, #4164, #4165) provide network attachment via the parallel port for Token-Ring and Ethernet. The Network Print Servers plug into the printer parallel port. For Ethernet, the new Ethernet NIC features are installed in the 4247 expansion slot and the parallel port is still available. The Network Print Server and the above RPQs provide the capability for both LAN support and twinax, coax, or serial support on the same IBM 4247 Printer.
    • The I-Data 7913 (RPQ numbers 8B4313 and 8B4314) provides either Token-Ring or Ethernet LAN attachment for IPDS data for twinax and coax printers.

      RPQ #8B4313 provides Token-Ring IPDS support. This RPQ is still required for IPDS Token-Ring. RPQ #8B4314 provides Ethernet IPDS support, and normally the Ethernet IPDS NIC, rather than this RPQ, will now be the preferred solution.

      Neither of these RPQs can be installed when the Ethernet NIC features are installed.

    While a Network Print Server and one of the I-Data 7913 RPQs (either RPQ 8B4313 or 8B4314) can both be installed on the same 4247-V03, only one of either the Network Print Server or the I-Data 7913 RPQ network attachments can be active at any time. Manual network switching between the ASCII (Network Print Server) and IPDS (I-Data RPQ) is required to switch between the attachments.

    While a Network Print Server and one of the Ethernet 10/100 NICs can be installed on the same 4247, only one of either the Network Print Server or the Ethernet 10/100 BaseT NIC attachments can be active at any time. Manual switching between the ASCII (Network Print Server) and the IPDS Ethernet 10/100 BaseT NIC is required to switch between the attachments.

    Replacement, Addition, and Installation of Attachment Cards for Installed Printers

    These Ethernet adapters can replace installed adapters on installed IBM 4247 Model 003 and V03 Printers.

    The following table shows the allowable replacements and additions of attachment cards for installed IBM 4247-V03 and 4247-003 Printers, and the feature to order to replace or add an adapter. All of these replacements and additions are easily installed by customers, and do not require IBM Field Engineering for installation.

      Installed Attachment         Replace             Feature Number
    Adapter(1) with to Order
    -------------------- ------------- --------------
    Any Attachment Twinax SCS #4212
    Any Attachment Twinax IPDS #4222
    Any Attachment Serial #4252
    Any Attachment Ethernet LAN #4262
    Any Attachment Coax IPDS #4242
    Any Attachment Coax SCS #4232
    Any Attachment IPDS NIC #4282(2)
    Any Attachment ASCII NIC #4272(2)

    Note: (1) "Any Attachment" is Twinax IPDS, Twinax SCS, Coax SCS, Coax IPDS, Serial, Ethernet LAN, ASCII NIC, or IPDS NIC, and includes "no attachment", which is the standard parallel adapter.

    Note: (2) May require new 4247 Licensed Internal Code provided with these features. The latest code may also be downloaded from vendor Web site (CPG International).

    IBM 4247-V03 Printer Stand

    The IBM 4247-V03 Printer Stand has three main sections:

    • A flat table surface to hold the printer
    • An input paper tray to hold forms before they are fed through the printer
    • An output paper tray for stacking forms after they are printed

    The table is designed specifically to support the features of the IBM 4247-V03, and since this stand accommodates the footprint and weight of the 4247-V03, printer vibration is minimized.

    The printer stand was also designed to serve the characteristics of the 4247-V03 printer. The stand accommodates two continuous forms and a separator in the front of the stand is used to ensure that the forms are kept separate.

    When dual continuous forms are used, one form rests on the input paper tray and the other form rests on the floor underneath the input tray.

    The printer stand is customer set-up and can be easily assembled in about 30 minutes.

    The original higher-priced enclosed cabinet style printer stand (#4462) is still available.

    The open printer stand is a lower priced printer stand option for the 4247-V03 printer. The present enclosed cabinet printer stand is still available. The open printer stand does not offer the refined appearance of the enclosed cabinet.

    Bulk Order for Optional Features

    For most products, the quantity of any feature that can be ordered is the same as the maximum number of the feature allowed per machine. Since the IBM 4247-003 and 4247-V03 features are now all customer setup (for 4247 Model 003 with Licensed Internal Code Level 6.05 or higher), in some cases it is desirable to bulk order certain features so that machines can be easily reconfigured by Business Partners and end users. Thus, for these MES features, the maximum order quantity is normally 10, which is greater than the maximum that can be installed on one printer.

    The maximum number of initial-order attachment features that can be ordered is one. Use the MES feature numbers for bulk orders.

    A procedure to determine the level of code installed in a printer is explained in the Supplementary information in this letter.

    For easy identification of boxed printers that have code level 6.05 and higher, the printer part number printed on the box label has been changed from 01PXXXX to 75PXXXX (where XXXX can be any number). The 01PXXXX numbers were used on printers shipped prior to 6.05 code.

    IBM 4247-003 Print Throughput Improvement

    The print speed of the IBM 4247-003 has been improved slightly for models with internal base code level 6.05 and higher. The improved code provides approximately a 5% greater throughput performance.

    Power Plug Adapter (#9801, 9802, 9803, 9804, 9805)

    When attaching the Ethernet 10/100 BaseT Network Print Server (#4164) to the 4247 Printers, a Power Plug (Power adapter) is needed. One of the following Power Plugs must be ordered with each Network Print Server.

    • US Plug Type: #9801

    These adapters, with the appropriate power plug, are required to furnish the correct voltage and plug into an electrical outltd widthet for the 10/100 BaseT Network Print Server (#4164). These adapters plug into an electrical outlet and transform the voltage to the voltage required by the Ethernet Network Print Server (FN 4164).

    The IBM 4247-V03 is a professional industrial printer that offers a faster print speed and a more rugged design than the current IBM 4247 models of serial matrix printers.

    The 4247-V03 and all features are customer setup.

    Physical Specifications

    • Dimensions in base configuration:
      • Width: 720.0 mm (28.3 inches)
      • Depth: 400.0 mm (15.8 inches)
      • Height: 350.0 mm (13.8 inches)
      • Weight: 33.0 kg (72.6 pounds)
    • Cabinet Printer Stand (#4462):
      • Top surface width: 726 mm (28.6 inches)
      • Top surface depth: 411 mm (16.2 inches)
      • Top surface height: 775 mm (30.5 inches)
      • Weight: 44.5 kg (98.1 pounds)
      • Footprint with Output Tray attached: 726 mm (W) x 792 mm (D) or 28.6" wide x 31.2" deep
    • Open Printer Stand (#4461)
      • Top surface width: 28.5 inches (72.4 cm)
      • Top surface depth: 16 inches (40.6 cm)
      • Top surface height: 28 inches (71.1 cm)
      • Weight: 63 lbs (28.6 Kg)
      • Footprint with Output Tray attached: 28.5 inches (72.4 cm) x 32 inches (81.3 cm)

    Operating Environment

    Input Voltage Required for 4247-V03 Universal Power Supply

    • 100 - 127 V ac single-phase grounded 50/60 Hz

    Printer Heat Output

    • 22 watts (75 Btu/hr) -- Idle (100 V - 240 V)
    • 215 watts (734 Btu/hr) -- Normal operation
    • 450 watts (1536 Btu/hr) -- Maximum (100 V - 240 V)

    Temperature

    10 to 40 degrees C (50 to 104 degrees F).

    Relative Humidity

    10 to 90 percent.

    Max Wet Bulb

    27 degrees C (81 degrees F).

    Noise Emission

    4247-V03 base printer:

    • Sound power level (LWAd):
      • Operating: 7.1 bels
      • Idle: 0.0 bels
    • Sound pressure level (LpAm):
      • Operating: 56.3 dBA (1)
      • Idle: 0.0 dBA

    Note: (1) Measured in DP Text mode.

    EMC Compliance

    The IBM 4247 meets the following standards:

    • Class A of FCC rules part 15
    • Class A of CE EN55022(1998)+A1, EN55024, EN6100-3-2+A14, EN6100-3-3
    • Class A of Canadian ICES-003
    • Class A of Australian/New Zealand AS/NZS 3548
    • Class A of Russian GOST

    Safety Compliance

    The IBM 4247 meets the following standards:

    • UL 1950, 3rd edition
    • TUV, EN60950/All (1999)
    • CSA, C22.2 No.950-95
    • Russian GOST
    • Mexico NOM
    • Argentina IRAM

    Procedure to Determine Base Code Level Installed in a 4247-003 Printer

    The following procedure can be used to determine the code level in a 4247-003 printer.

    1. Load forms in a tractor or manual cut-sheet tray
    2. Press test key
    3. Scroll until the printer displays "4247 Operator Print Tests Firmware information"
    4. Press enter to print
    5. Information on the code level is on the printout

    Latest ASCII NIC compared with Previous NIC

    The latest ASCII Ethernet 10/100 BaseT NIC (FN #4270 and #4272) is generally compatible with the previous NIC feature (FN #4260 and #4262). A comparison follows:

                                        Latest ASCII        Previous
    Ethernet NIC ASCII NIC
    # 4270 (Initial) # 4260 (Initial)
    # 4272 (MES) # 4262 (MES)
    --------------------------------- ---------------- ----------------
    INSTALLATION AND INTEGRATION
    Network speed 10/100 Mbps 10/100 Mbps
    Network connection BaseT BaseT
    Auto-detection network speed YES YES
    Parallel interface free YES NO
    Network configuration through YES NO
    printer op panel
    Web page configuration YES YES
    Web page login password YES YES
    protection
    AIX/UNIX install scripts YES YES
    Windows Port Monitor YES YES
    NIC configuration printout YES (op panel) YES (test button)
    NIC test page printout YES YES
    PRINTING METHODS
    Port 9100 YES YES
    LPR/LPD YES YES
    FTP YES YES
    Reverse Telnet NO YES
    TN5250 NO NO
    TN3270 NO NO
    Multiple internal print server NO(1 queue) YES(8 queues)
    queues
    String substitutions NO YES
    String before/after job NO YES
    Simultaneous multiprotocol YES YES
    communications
    SYSTEMS COMPATIBILITY
    OS 400 YES YES
    AIX /UNIX YES YES
    Novell Netware NO YES
    - IPX/SPX NO YES
    - Rconsole NO YES
    - Rprinter NO YES
    - Pserver Bindery Mode NO YES
    - Pserver NDS NO YES
    - SAP NO YES
    - RIP NO YES
    - NLSP NO YES
    - DIAG NO YES
    Windows 95,98,2000,NT,XP YES YES
    - NETBIOS over TCP YES YES
    - NETBEUI NO YES
    - WINS NO YES
    - DNS YES YES
    - LANtastic networks Not tested YES
    Sun Solaris YES YES
    OS2 NO YES
    MacIntosh / Apple EtherTalk NO YES
    NETWORK MANAGEMENT
    IBM NPM YES NO
    HP JetAdmin YES YES
    E-mail SMTP YES YES
    Internal Web page YES YES
    LINK LAYER
    ETHERNET II YES YES
    802.2 YES YES
    802.3 YES YES
    2/SNAP YES YES
    PROTOCOLS
    IP YES YES
    TCP YES YES
    UDP YES YES
    ARP YES YES
    RARP YES YES
    SMB YES NO
    Telnet YES YES
    Reverse Telnet NO YES
    PROS NO YES
    BOOTP YES YES
    FTP YES YES
    TFTP NO YES
    ICMP YES YES
    LPR/LPD YES YES
    DHCP YES YES
    SNMP YES YES
    IPP NO YES
    SMTP YES YES
    Direct Socket Printing YES YES
    http YES YES
    PING YES YES
    SLPv2 NO YES
    SNMP
    MIB II YES (note 1) YES
    Host resource MIB YES YES
    4247 Private MIB YES NO
    HARDWARE
    RISC processor YES YES
    Flash memory 4 MB 1 MB
    RAM 16 MB 2 MB
    Attachment connector type RJ-45 RJ-45
    Network traffic led YES (yellow) YES (red)
    Network speed led YES (green) NO
    World wide EMC compatibility YES YES
    NIC FIRMWARE UPGRADE
    Firmware upgrade across network YES YES
    Firmware upgrade through printer YES NO
    parallel port

    Note: (1) MIB-II is not fully implemented per RFC1213. All relevant
    parts of MIB-II required to support IBM NPM and HP JetAdmin are
    implemented.

    Latest IPDS NIC (#4280, 4282) Compared to I-Data 7913 NIC compared with Previous IPDS NIC

    The ASCII-IPDS Ethernet 10/100 BaseT fully integrated NIC is generally compatible with the Idata 7913 external printer LAN attachment. A comparison follows:

    Note: Printer intervention messages sent to the host from the latest IPDS NIC and previous Idata 7913 NIC are generally equivalent. Both implementations differ from IPDS Twinax and IPDS Coax attachments in the following areas.

    • Printer Cancel Print key cannot be used. Pressing this key will result in an "Invalid Key Press" operator panel message in the new NIC implementation.
    • Explicit device status messages are not returned to the host for out of paper and forms jam printer intervention conditions.
                                        Latest IPDS         Previous
    Integrated NIC External IPDS
    FC 4280 (Initial) NIC
    FC 4282 (MES) RPQ 8B4314
    --------------------------------- ----------------- -----------------
    INSTALLATION AND INTEGRATION
    Network speed 10/100 Mbps 10 Mbps
    Network connection BaseT BaseT, Base2
    Auto-detection network speed YES YES (10 Mbps)
    Network configuration through YES NO (BOOTP server
    printer op panel required)
    Web page configuration YES NO
    Web page login password protection YES NO
    AIX/UNIX install scripts YES NO
    NIC configuration printout YES (op panel) YES (test button)
    NIC test page printout YES YES
    Power supply Internal External
    PRINTING METHODS
    TCP/IP IPDS Port 5001 YES YES
    Multiple internal print server queues NO (1 queue) NO (1 queue)
    Hot port (ASCII - IPDS ) switching NO NO
    PRINT SERVER FACILITIES SUPPORT
    PSF AIX YES YES
    PSF OS400 YES YES
    PSF MVS YES YES
    PSF VSE YES YES
    PSF VM YES YES
    PSF OS2 NO YES
    NETWORK MANAGEMENT
    E-mail SMTP YES NO
    Internal Web page YES NO
    PROTOCOLS
    IP YES YES
    TCP YES YES
    UDP YES YES
    ARP YES YES
    RARP YES NO
    Telnet YES YES
    BOOTP YES YES
    FTP YES NO
    TFTP NO YES
    ICMP YES YES
    DHCP YES NO
    SMTP YES YES
    Direct Socket Printing YES YES
    http YES NO
    PING YES YES
    IBM PSF- AFP YES YES

    Limitations

    The 4247-V03 has the following limitations:

    • Fast Draft print quality mode supports printing at 10 characters per inch only. DP, DP Text, and NLQ print quality modes support 10, 12, 15, 16.7, 17.1 and 20 characters per inch.
    • The front continuous forms paper path will handle up to 8-part forms. Forms greater than 4-part should be tested for readability prior to use.
    • No automatic sheet feed feature is available.
    • The following ASCII restrictions apply when using IBM 4247 native escape commands to print barcode:
      • Current barcode applications that use barcode escape commands must be modified to use IBM 4247 native barcode commands.
      • Barcode printing is limited to picket orientation and 3 to 1 wide to narrow ratio when printed using native 4247 escape commands.

    The 4247-V03 has the following additional limitations when emulating previous ASCII printers:

    • The following commands and functions are not supported when replacing or adding to an existing IBM 4224 (Model 301, 302, 3E3), 4230 (Model 4xx or 5xx), or 4232 Model 302:
      • Begin/End Overstrike
      • Begin/End Understrike
      • Select Presentation Media
      • Set Presentation Position
      • Initialize/Delete Local Font
      • Select Local Character Set
      • Set Vertical Units
      • Graphic Segment List
      • Barcode
      • Segment
      • Overlays
      • Graphic Mapping Control
      • Read Printer Status
    • The following functions are not supported when using the Epson FX 1050 driver, IBM 4202 Proprinter III XL, or IBM 2381 driver in OS/2 or Windows:
      • Barcode selection or printing
      • Load/park form paths
      • Data-stream emulation switching
      • Metric vertical line spacing
    • The 4247-V03 does not support the following 4247-A00 operator panel settings:
      • Characters per inch (pitch) = 5, 6, 7.5, 8.5, proportional.
      • Lines per inch (lpi) = 12, 3L/30mm, 84L/30mm, 6L/30mm, 8L/30mm, 12L/mm.
      • Maximum page length for cut sheet forms = A5, A4, A3, LGL, LTR.
      • Parallel interface = 1284 nibble.(1)
      • Data bits = 7.
      • Left margin alignment = 0 to 13.4 inches. (Model 003 left margin alignment is 0 to 1.875 inches.)
      • Top margin (top of form) = 0 to 660 lines.(2)
      • Impact = soft, strong.(3)

    Note: (1) Setting id is non-functional on A00.

    Note: (2) Paper load position range is -0.166 (-24/144) to 2 (+288/144) inches. To set top of form to larger values, the user must move form and press top-of-form key.

    Note: (3) Impact force is always set to strong.

    Paper Handling

    • Continuous Forms:
      • The 4247-V03 will handle up to 8-part continuous forms in either front paper path.
    • For the Front Tractor Paths:
      • Form weight can range from 56 grams per square meter (gsm) (15 lb) to 150 gsm (40 lb). Paper weights outside this range must be tested by the customer for proper operation.
      • Overall (total) form thickness for all parts may range from 0.08 mm (0.003 in) to 0.64 mm (0.025 in).

    The following forms widths and lengths are supported:

    • Form width from 76.2 mm (3 in) to 431.8 mm (17 in)
    • Form lengths from 76.2 mm (3 in) to 609.6 mm (24 in)

    Forms less than 152.4 mm (6 in) in length or width should be tested for satisfactory stacking and may require operator assistance.

    Software Requirements

    System Support via Parallel Attachment

    The 4247-V03 can use the IBM Personal Printer Data Stream (PPDS) in IBM 4202 Proprinter III XL or IBM 2381 Personal Printer emulations by choosing the corresponding device driver for the systems listed below.

    In Epson FX emulation mode the 4247-V03 can print files coded for the Epson FX-1050 using the Epson ESC/P printer control language.

    Also, native 4247 support is provided for AIX and the Host Print Transform function in OS/400. The following systems support the 4247-V03:

        System          Software - Minimum Level             Emulation
    ----------- ---------------------------------- -----------------
    Personal - Microsoft Windows 3.0 and PPDS or Epson FX
    Computers

    RS/6000 - AIX Version 3.2.5 and above PPDS or Epson FX
    and pseries

    AS/400 and - OS/400(TM) V4R5 and above PPDS or Epson FX
    iseries(1)
    - PC Support/400 W/S Function V2.2 PPDS or Epson FX
    - Client Access/400 V3.1 PPDS or Epson FX
    - Personal Communication for PPDS or Epson FX
    AS/400 for Windows V4.0
    - Personal Communication for PPDS or Epson FX
    AS/400 for OS/2 V4.0
    - IBM 5250 Enhanced Emulation PPDS or Epson FX
    for Windows V1.1
    - IBM 5250 Enhanced Emulation PPDS or Epson FX
    for DOS V2.4

    Note: (1) Host selection of the print quality is limited to three of the four qualities (Fast Draft, DP and NLQ). The host selection of Fast Draft and DP is dependent on the printer operator panel setting of the "Host Fast Draft enable/disable" switch. Fast Draft and DP are mutually exclusive in that only one can be active at a time.

    Network Operating System Support via Parallel Attachment

    The Network Print Server features are supported in the following environments:

     Protocol          Operating System
    -------- -----------------------------------------------------
    IPX/SPX Novell NetWare 3.11 and above
    Novell NetWare 4.01 and above using bindery emulation

    TCP/IP Novell NetWare 3.11 and above
    Novell NetWare 4.01 and above using bindery emulation

    NetBIOS/NetBEUI IBM LAN Server 1.3 and above
    TCP/IP IBM LAN Server 1.3 and above

    NetBIOS/NetBEUI Microsoft LAN Manager 2.0c and above
    TCP/IP Microsoft LAN Manager 2.0c and above

    NetBIOS/NetBEUI Windows NT 3.1 and above
    TCP/IP Windows NT 3.1 and above

    TCP/IP AIX 3.2.5 and above

    Note: Supported TCP/IP print methods are LPD, FTP, and Reverse Telnet.

    IBM 4247-V03 Coax Software Support

    IBM System or       IBM Software            4247  4224/4230   3268/3287
    Controller (Minimum release level) Mode Emulation Emulation
    ------------- ----------------------- ---- --------- ---------
    zseries and
    S/390 Non-IPDS Mode
    GDDM Version 3.1 Yes Yes(1) Yes
    VM/ESA V2.1 Yes Yes(1) Yes
    VM/RSCS V3.1 Yes Yes(1) Yes
    VM/VTAM V4.3 Yes Yes(1) Yes
    MVS/ESA V4.2.0 Yes Yes(1) Yes
    MVS/VTAM V4.3 Yes Yes(1) Yes
    VSE/ESA V1.3.3 Yes Yes(1) Yes
    VSE/VTAM V3.4 Yes Yes(1) Yes
    CICS/VSE V2.2.0(2) Yes Yes(1) Yes

    IPDS Mode
    GDDM Version 3.1 No Yes No
    GDDM Version 3.2 Yes Yes No
    PSF V3.1.0for OS/390
    and above Yes Yes(1) No
    PSF/VM V2.1.1 No Yes(1) No
    PSF/VSE V2.2.1 Yes(2) Yes(1) No

    Note: (1) Supported in 4224 mode only.

    Note: (2) Requires PTF UD50093 for PSF/VSE V2.2.1.

    IBM 4247-V03 Twinax Software Support

    IBM System or        IBM Software           4247  4230/4224     4214
    Controller (Minimum release level) Mode Emulation Emulation
    ------------- -------------------------- ---- --------- ---------
    iseries and Non-IPDS Mode
    AS/400 SSP Release 7.1 No Yes(1) Yes
    OfficeVision/400 Yes Yes Yes
    Business Graphics Util. Yes Yes Yes
    GDDM Yes Yes Yes
    CL and DDS Yes Yes Yes

    IPDS Mode
    OS/400 V4R5 and above Yes Yes Yes
    GDDM Yes Yes Yes
    Adv Funct. Print Ut V2R1 Yes Yes No
    PSF/400 V4R5 and above Yes Yes Yes

    zseries and
    S/390 PSF V3.1.0 for OS/390
    and above Yes(2) Yes(1,2) No

    Note: (1) Supported in 4224 mode.

    Note: (2) PSF for OS/390 will support a coax or twinax printer attached via the I-Data 7913 RPQ.

    Coax or Twinax Attachment

         Print
    Quality Character Style Character Spacing
    ---------- --------------- ------------------------
    Fast Draft Gothic Essay 10 cpi

    DP Gothic Essay 10, 12, 15, and 16.7 cpi
    Proportional Approximately 11.5 cpi
    Space

    DP Text Courier Essay 10, 12, 15, and 16.7 cpi
    Proportional Approximately 11.5 cpi
    Space

    NLQ Courier Essay 10, 12, 15, and 16.7 cpi
    Proportional Approximately 11.5 cpi
    Space

    Parallel or Serial Attachment

         Print
    Quality Character Style Character Spacing
    ---------- --------------- ----------------------------------
    Fast Draft Gothic Essay 10 cpi

    DP Gothic 10, 12, 15, 16.7, 17.1, and 20 cpi
    Gothic Italic
    Proportional
    Space 10, 12, 15, 16.7, 17.1, and 20 cpi

    DP Text Courier 10, 12, 15, 16.7, 17.1, and 20 cpi
    Courier Italic
    Proportional
    Space 10, 12, 15, 16.7, 17.1, and 20 cpi

    NLQ Gothic 10, 12, 15, 16.7, 17.1, and 20 cpi
    Gothic Italic
    Proportional
    Space 10, 12, 15, 16.7, 17.1, and 20 cpi
    Courier 10, 12, 15, 16.7, 17.1, and 20 cpi
    Courier Italic
    Proportional
    Space 10, 12, 15, 16.7, 17.1, and 20 cpi

    Note: Proportional spacing on the coax or twinax attachment changes the characters per inch to approximately 11.5 cpi.

    Note: Proportional spacing on the parallel or serial port is a separate attribute and can be used at all cpi settings with each of the character styles listed above.

    Note: The above print quality levels and character styles will include all characters defined by the Resident Code Pages described above unless otherwise noted. Any quality level can be printed at either 6 or 8 lines per inch.


    Publications

    The following 4247 Model V03 publications are shipped with each printer.

    • Model V03: Quick Setup Guide (hardcopy - English)
    • IBM 4247 Model V03: Safety Information
    • IBM 4247 Model V03: Warranty Information
    • A CD ROM that contains softcopy in the languages listed below of the following publications:
      • IBM 4247 Model V03: User's Guide
      • IBM 4247 Model V03: Programmer's Reference
      • IBM 4247 Model V03: Safety Information
      • IBM 4247 Model V03: Warranty Information
      • Model V03: Quick Setup Guide

    The CD contains the above publications in the following languages: English, French, Brazilian-Portuguese, German, Italian, Spanish, Danish, Dutch, Finnish, Norwegian, Swedish, Arabic, Chinese-Traditional, Chinese-Simplified, Czech, Hungarian, Polish, Russian, and Turkish.

    This CD can also be ordered using Form Number SK2T-9359.

    All of the above publications are also available in the IBM Printing Systems Digital Library that can be accessed from the following Web site:

    http://www.ibm.com/printers
    1. Select "Manuals"

    The Quick Setup Guide is also available as hard-copy. The table below shows the Form Numbers for selected languages.

                                                            Quick Setup
    Language Guide
    ---------------------------------------------- -----------
    English, French, Brazilian-Portuguese, German, S544-5859
    Italian, Spanish

    Danish, Dutch, Finnish, Norwegian, Swedish S544-5860

    Arabic, Chinese-Traditional, Czech, Hungarian, S544-5861
    Polish, Russian, Turkish

    The User's Guide contains the following sections:

    • Getting Started
    • Understanding the Operator Panel
    • Printer Configuration Menus
    • Setting Up Different Forms Paths
    • Problem Solving
    • Printer and Form Specifications

    No Charge Specify Codes

    Description                                                     Feature
    ----------------------------------- -------
    POWER CORD OPTIONS(1)
    Specify for 6-Foot Chicago Cord 9250
    Specify for 9-Foot U.S. Cord 9251

    PUBLICATION LANGUAGE FEATURE CODES
    English, Brazilian-Portuguese, French, German, 9960
    Italian, Spanish

    Danish, Dutch, Finnish, Swedish 9961

    Arabic, Chinese Simplified, Hungarian, Polish 9962
    Russian, Turkish

    Operator Panel Overlay - English 9980

    Note: (1) Defaults to Country Code of Order.

    Two lengths of low voltage power cords are available. Specify feature code 9250 for 6.0-ft (1.8m) Chicago power cord with non-locking plug or feature code 9251 for 2.8m (9-ft) power cord with non-locking plug. The 9-ft. power cord with non-locking plug is the default.

    Country Low Voltage Power Cords

     Power Cord
    Feature
    Code List of Countries
    ---------- ------------------------------------------------------
    9251 Aruba Bahamas Barbados
    Bermuda Bolivia Brazil
    Canada Cayman Islands Columbia
    Costa Rica Curacao Dominican Republic
    El Salvador Ecuador Guatemala
    Guyana Haiti Honduras
    Jamaica Japan Korea
    Liberia Mexico Netherlands Ant.
    Nicaragua Panama Peru
    Philippines Saudi Arabia Surinam
    Taiwan Trinidad Tobago
    United States Venezuela

    Country High Voltage Power Cords

     Power Cord
    Feature
    Code List of Countries
    ---------- -----------------------------------------------------
    9979 Argentina Australia China (PR)
    Columbia New Zealand Papua N. Guinea
    Paraguay Uruguay Western Samoa

    9970 Afghanistan Algeria Angola
    Austria Belgium Benin
    Bosnia Bulgaria Burundi
    Cameroon C. Afr. Rep. Chad
    Congo Brazzaville Croatia Czech Republic
    Finland France French Guyana
    Germany Greece Guinea
    Hungary Iceland Indonesia
    Iran Ivory Coast Jordan
    Kenya Korea Lebanon
    Luxembourg Macau Macedonia
    Malagasy Martinique Mauritania
    Mauritius Monaco Montenegro
    Morocco Mozambique Netherlands
    New Caledonia Niger Norway
    Poland Portugal Romania
    Saudi Arabia Senegal Serbia
    Slovak Republic Slovenia Spain
    Sudan Sweden Syria
    Togo Tunisia Turkey
    Upper Volta Russia Vietnam
    Zimbabwe

    9975 Denmark

    9972 Bangladesh Burma Myanmar
    Pakistan South Africa Sri Lanka

    9971 Antigua Bahrain Brunei
    Channel Islands Cyprus Fiji
    Ghana Hong Kong India
    Iraq Ireland Kuwait
    Malawi Malaysia Malta
    Nepal Nigeria North Yemen
    Oman Polynesia Qatar
    Sierra Leone Singapore South Yemen
    Tanzania Uganda United Kingdom
    United Arab Emir. Zambia

    9974 Liechtenstein Switzerland

    Country High Voltage Power Cords
     Power Cord
    Feature
    Code List of Countries
    ---------- ------------------------------------------------------
    9973 Chile Ethiopia Italy
    Libya Somalia

    9976 Israel

    9978 Aruba Bahamas Barbados
    Bermuda Bolivia Brazil
    Canada Cayman Islands Costa Rica
    Curacao Dominican Rep. El Salvador
    Ecuador Guatemala Guyana
    Haiti Honduras Jamaica
    Japan Liberia Netherlands Ant.
    Nicaragua Panama Peru
    Philippines Surinam Taiwan
    Thailand Trinidad Tobago
    United States Venezuela

    Special Feature Codes -- Chargeable

    Description                                    Machine   Model  Feature
    ------------------------------------------ ------- ----- -------
    IBM 4247 Model V03 4247 V03

    PRINTER HARDWARE FEATURES
    Additional Front Tractor (V03) 4003
    Open Printer Stand (V03) 4461
    Cabinet Printer Stand (V03) 4462

    NETWORK PRINT SERVER FEATURES
    Network Print Server Token-Ring Type-1 4121
    Network Print Server Token-Ring Type-3 4124
    Network Print Server Ethernet 10BASE-T 4164
    Network Print Server Ethernet 10BASE2 4165
    12 Volt AC Adapter for U.S. 7701

    ATTACHMENT FEATURES
    Twinax SCS Attachment (Initial Order) 4210
    Twinax SCS Attachment (MES) 4212
    Twinax IPDS Attachment (Initial Order) 4220
    Twinax IPDS Attachment (MES) 4222
    Coax SCS Attachment (Initial Order) 4230
    Coax SCS Attachment (MES) 4232
    Coax IPDS Attachment (Initial Order) 4240
    Coax IPDS Attachment (MES) 4242
    Serial Attachment (Initial Order) 4250
    Serial Attachment (MES) 4252
    LAN Attachment (Initial Order) (WDFM US on 2/04) 4260
    LAN Attachment (MES) (WDFM US on 2/04) 4262

    Ethernet 10/100 BaseT NIC (ASCII) - Initial Order 4270
    Ethernet 10/100 BaseT NIC (ASCII) - MES 4272

    Ethernet 10/100 BaseT NIC (IPDS) - Initial Order 4280
    Ethernet 10/100 BaseT NIC (IPDS) - MES 4282

    OPTIONAL CABLES
    RS/6000 RS-232 Serial Cable 3741
    AS/400 RS-232 Serial Cable (40 ft) 4342
    AS/400 RS-232 Serial Cable (100 ft) 4346
    PC Parallel Cable 5612
    1284 Parallel Bidirectional Cable (15 ft) 5614
    PC RS-422 Serial Cable 8652
    PC RS-232 Serial Cable (20 ft) 9386

    Hardware Features

    For most products, the quantity of any feature that can be ordered is the same as the maximum number of the feature allowed per machine. Since the IBM 4247-V03 optional features are all customer installable, it is desirable, in some cases, to bulk order certain features so that machines can be easily re-configured by Business Partners and end-users. Thus, for the following features, the maximum order quantity is greater than the maximum that can be installed on one printer.

    (#4003) Additional Tractor Assembly

    This feature provides a second front continuous forms tractor path. This tractor feature is in addition to the standard continuous forms tractor paper path standard with the Model V03. Up to 8-part forms may be used in the front tractor path.

    • Maximum: One per 4247-V03 printer
    • Minimum: None.
    • Maximum Order Quantity: Ten
    • Co-requistes: None.
    • Prerequistes: Base printer.
    • Field Installation: Yes.
    • Customer Setup: Yes.

    (#4461) Open Printer Stand

    Provides a sturdy printer stand designed for the IBM 4247 Model V03 printer.

    • Maximum Per 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: None.
    • Field Installation: Yes.
    • Customer Setup: Yes

    (#4462) Cabinet Printer Stand

    Provides a sturdy printer stand designed for the IBM 4247 Model V03 printer.

    • Maximum Per 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: None.
    • Field Installation: Yes.
    • Customer Setup: Yes

    Optional Attachments (Initial Order)

    (#4210) Twinax SCS Attachment (Initial Order)

    Provides for printer attachment to System 36 and AS/400 systems.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: One
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: IBM 4247-003 or V03
    • Limitations: Not with any other initial order attachment (#4220, 4230, 4240, 4250, 4260)
    • Field installation: No, initial order only
    • Customer Setup: Yes.

    (#4220) Twinax IPDS Attachment (Initial Order)

    Provides for printer attachment to AS/400 systems using IPDS.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: One
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: IBM 4247-003 or V03
    • Limitations: Not with any other initial order attachment (#4210, 4230, 4240, 4250, 4260)
    • Field installation: No, initial order only
    • Customer Setup: Yes.

    (#4230) Coax SCS Attachment (Initial Order)

    Provides for printer attachment to host systems via Coax attachment using SCS datastreams.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: One
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: IBM 4247-003 or V03
    • Limitations: Not with any other initial order attachment (#4210, 4220, 4240, 4250, 4260)
    • Field installation: No, initial order only
    • Customer Setup: Yes.

    (#4232) Coax SCS Attachment (MES order)

    Provides attachment card and microcode for 4247-V03 or 4247-003 attachment to host systems via Coax attachment using SCS datastreams.

    • Maximum: One
    • Minimum: None
    • Customer Setup: Yes
    • Co-requistes: None
    • Prerequistes: 4247-V03 or 4247-003 printer

      Note: A 4247-003 printer must have Base Code level 6.05 or higher If this code is needed, submit an RPQ.

    • Limitations: None, this MES is a conversion MES to replace any of the installed attachment cards (4210, 4211, 4220, 4221, 4240, 4241, 4250, 4251, 4260, or 4261) with this attachment card.
    • Plant installation: No
    • Field installation: Yes

    (#4240) Coax IPDS Attachment (Initial Order)

    Provides for printer attachment to host systems via Coax attachment using IPDS datastreams.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: One
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: IBM 4247-003 or V03
    • Limitations: Not with any other initial order attachment (#4210, 4220, 4230, 4250, 4260)
    • Field installation: No, initial order only
    • Customer Setup: Yes.

    (#4250) Serial Attachment (Initial Order)

    Allows for printer attachment to host systems or personal computers via RS-232/RS-422 Serial attachment.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: One
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: IBM 4247-003 or 4247-V03
    • Limitations: Not with any other initial order attachment (#4210, 4220, 4230, 4240, 4260)
    • Field installation: No, initial order only
    • Customer Setup: Yes.

    (#4260) LAN Attachment (Initial Order)

    Note: Replaced by #4270, #4280.

    Provides direct LAN attachment for 10/100BaseT Ethernet networks.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: One
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: IBM 4247-003 or V03
    • Limitations: Not with any other initial order attachment (#4210, 4220, 4230, 4240, 4250)
    • Field installation: No, initial order only
    • Customer Setup: Yes.

    (#4212) Twinax SCS Attachment (MES order)

    This feature is used to attach an IBM 4247-003 or 4247-V03 printer to an AS/400 systems using SCS.

    Provides the 4247-003 or 4247-V03 attachment card to add a Twinax SCS attachment to a 4247-003 or V03 printer with no attachment cards (i.e. none of features 4210, 4212, 4220, 4222, 4230, 4240, 4250, 4252, 4260, 4262) or to replace an attachment card.

    • Maximum per 4247-003 or V03: One.
    • Maximum order quantity: Ten
    • Minimum: None.
    • Customer Setup: Yes
    • Co-requistes: None.
    • Prerequistes: 4247-003 or V03 printer
    • Limitations:
      • Model 003:
        • This feature cannot be used to replace either the Coax SCS (FN 4230) or the Coax IPDS (FN 4240) attachments.
      • Model V03:
        • No Limitations
    • Plant installation: No
    • Field installation: Yes
    • Customer Setup: Yes

    (#4222) Twinax IPDS Attachment (MES order)

    This feature is used to attach an IBM 4247-003 or 4247-V03 printer to an AS/400 systems using IPDS.

    Provides the 4247-003 or 4247-V03 attachment card to add a Twinax IPDS attachment to a 4247-003 or 4247-V03 printer with no attachment cards (i.e. none of features 4210, 4212, 4220, 4222, 4230, 4240, 4250, 4252, 4260, 4262) or to replace an attachment card.

    • Maximum per 4247-003 or V03: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Customer Setup: Yes
    • Co-requistes: None
    • Prerequistes: 4247-003 or V03 printer
    • Limitations:
      • Model 003:
        • This feature cannot be used to replace either the Coax SCS (FN 4230) or the Coax IPDS (FN 4240) attachments.
      • Model V03:
        • No Limitations
    • Plant installation: No
    • Field installation: Yes

    (#4232) Coax SCS Attachment (MES order)

    Provides attachment card and microcode for 4247-V03 or 4247-003 attachment to host systems via Coax attachment using SCS datastreams.

    • Maximum: One.
    • Minimum: None.
    • Customer Setup: Yes
    • Co-requistes: None.
    • Prerequistes: 4247-V03 or 4247-003 printer
    • A 4247-003 printer must have Base Code level 6.05 or higher If this code is needed, submit an RPQ request.
    • Limitations: None, this MES is a conversion MES to replace any of the installed attachment cards (4210, 4211, 4220, 4221, 4240, 4241, 4250, 4251, 4260, or 4261) with this attachment card.
    • Plant installation: No
    • Field installation: Yes

    (#4242) Coax IPDS (MES order)

    Provides for attachment to host systems coax and IPDS datastreams.

    On a Model 003, this feature can only be used to change a Coax SCS (FN 4230) attachment card to Coax IPDS.

    On a Model V03, this feature can replace any attachment card.

    • Maximum per 4247-003 or V03: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Customer Setup: Yes
    • Co-requistes: None.
    • Prerequistes:
      • Model 003
        • 4247-003 printer with Coax SCS (FN 4230), or a 4247-003 with no attachment cards (i.e. none of FN 4210, 4212, 4220, 4222, 4230, 4240, 4242, 4250, 4252, 4260, 4262)
      • Model V03:
        • None
    • Limitations:
      • Model 003:
        • This feature cannot be used to replace either the Coax SCS (FN 4230) or the Coax IPDS (FN 4240) attachments.
      • Model V03:
        • No Limitations
    • Plant installation: No
    • Field installation: Yes

    (#4252) Serial Attachment (MES order)

    This feature is used to attach an IBM 4247-003 or 4247-V03 printer to host systems or personal computers via RS-232/RS-422 Serial attachment.

    This feature provides the 4247-003 or V03 attachment card to add a Serial attachment to a 4247-003 or V03 printer with no attachment cards (i.e. none of FN 4210, 4212, 4220, 4222, 4230, 4240, 4250, 4252, 4260, 4262) or to replace an attachment card.

    • Maximum per 4247-003 or V03: One.
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Customer Setup: Yes
    • Co-requistes: None.
    • Prerequistes: 4247-003 or V03 printer
    • Limitations:
      • Model 003:
        • This feature cannot be used to replace either the Coax SCS (FN 4230) or the Coax IPDS (FN 4240) attachments.
      • Model V03:
        • No Limitations
    • Plant installation: No
    • Field installation: Yes

    (#4262) LAN Attachment (MES order)

    Note: Replaced by #4272, #4282.

    Provides attachment card and microcode for 4247-003 or V03 direct LAN connection to 10/100BaseT Ethernet networks.

    Provides the 4247-003 or 4247-V03 attachment card to add an Ethernet 10/100 BaseT LAN attachment to a 4247-003 or 4247-V03 printer with no attachment cards (i.e. none of FN 4210, 4212, 4220, 4222, 4230, 4240, 4250, 4252, 4260, 4262) or to replace an attachment card.

    • Maximum per 4247-003 or V03: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Customer Setup: Yes
    • Co-requistes: None.
    • Prerequistes: 4247-003 or 4247-V03 printer
    • Limitations:
      • Not with any Network Print Server (#4121, 4124, 4164, or 4165)
      • Model 003:
        • This feature cannot be used to replace either the Coax SCS (FN 4230) or the Coax IPDS (FN 4240) attachments.
      • Model V03:
        • No Limitations
    • Plant installation: No
    • Field installation: Yes

    Network Print Server Features

    (#4121) Token-Ring Media Type-1 Network Print Server

    Provides network attachment via the parallel port to a Token-Ring Type 1 network.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: None
    • Limitations: Not with other Network Print Servers (#4124, 4164, 4165) or direct LAN attachment (#4260 or 4262).
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#4124) Token-Ring Media Type-3 Network Print Server

    Provides network attachment via the parallel port to a Token-Ring Type 3 network.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: None
    • Limitations: Not with other Network Print Servers (#4121, 4164, 4165) or direct LAN attachment (#4260, or 4262).
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#4164) Ethernet Network Print Server

    Provides network attachment via the parallel port to an Ethernet 10BaseT network for 10/100 BaseT Ethernet. Network Print Servers shipped prior to January, 2005, only supported 10BaseT, not 100BaseT. Units shipped after December, 2004 are capable of both 10BaseT and 100BaseT.

    • Maximum Per 4247-003 or V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requisites: One of the following must be ordered for each Network Print Server ordered:
      • US Plug Type: #9801
      • UK Plug Type: #9802
      • European Plug Type: #9803
      • Japanese Plug Type: #9804
      • Australian Plug Type: #9805
    • Prerequisites: IBM 4247 Model 001, A00, 002, V03 or 003 Printer
    • Limitations: Not with direct LAN attachment (#4260 or 4262) on Models V03 ad 003.
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#4165) Ethernet 10Base2 Network Print Server

    Provides network attachment via the parallel port to an Ethernet 10Base2 network.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: None
    • Limitations: Not with other Network Print Servers (#4121, 4124, 4164) or direct LAN attachment (#4260 or #4262).
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#4270) Ethernet 10/100 BaseT NIC (ASCII) - Initial Order

    (#4272) Ethernet 10/100 BaseT NIC (ASCII) - MES

    • Maximum Per 4247-V03 or 4247-003 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None
    • Co-requisites: None
    • Prerequisites: 4247 Model 003 or V03
    • Field Upgrade: Yes, as FN 4272 (customer installation)
    • Customer Setup: Yes for both features (4270 and 4272)
    • Limitations: Printer must have Base Code Level 2.00 or later for the 4247-V03, or Level 7.00 or later for the 4247-003. The required code is provided on the CD ROM shipped with the feature. The latest code level can also be downloaded from the vendor Web site (CPG International).

    This feature cannot be installed with:

    • Any I-Data RPQ (RPQ #8B4314 or 8B4313)
    • The LAN Attachment feature (#4260 or 4262)

    (#4280) Ethernet 10/100 BaseT NIC (IPDS) - Initial Order

    (#4282) Ethernet 10/100 BaseT NIC (IPDS) - MES

    Provides an integrated Ethernet 10/100 Network Interface Card with IPDS cpability.

    • Maximum Per 4247-V03 or 4247-003 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None
    • Co-requisites: None
    • Prerequisites: 4247 Model 003 or V03
    • Field upgrade: Yes, as FN 4282 (customer installation)
    • Customer Setup: Yes for both features (4280 and 4282)
    • Limitations: Printer must have Base Code Level 2.00 or later for the 4247-V03, or Level 7.00 or later for the 4247-003. The required code is provided on the CD ROM shipped with the feature. The latest code level can also be downloaded from the vendor Web site (CPG International).

    This feature cannot be installed with:

    • Any I-Data RPQ (RPQ #8B4314 or 8B4313)
    • The LAN Attachment feature (#4260 or 4262)

    Network Print Server Adapter with Power Plugs

    These adapters, with the appropriate power plug, are required to furnish the correct 12 volt power for Network Print Servers. These adapters plug into an electrical outlet and transform the voltage to the 12 volts required by the Token-Ring (FN 4121 or 4124) and the Ethernet 10Base2 Network Print Server (FN 4165). No Adapter is required for the Ethernet 10BaseT Network Print Server (FN 4164) since it receives power from the printer.

    (#7701) US Network Print Server Adapter and Plug

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: A Network Print Server (#4121, 4124, 4165)
    • Limitations: Not with other AC Adapters (#7702, 7703, 7704, or 7705)
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#7702) United Kingdom Network Print Server Adapter and Plug

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: A Network Print Server (#4121, 4124, 4165)
    • Limitations: Not with other AC Adapters (#7701, 7703, 7704, or 7705)
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#7703) European Network Print Server Adapter and Plug

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: A Network Print Server (#4121, 4124, 4165)
    • Limitations: Not with other AC Adapters (#7701, 7702, 7704, or 7705)
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#7705) Australia Network Print Server Adapter and Plug

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Minimum: None.
    • Co-requistes: None.
    • Prerequistes: A Network Print Server (#4121, 4124, 4165).
    • Limitations: Not with other AC Adapters (#7701, 7702, 7703, or

    Optional Cable Features

    (#3741) RS/6000 RS-232 Cable

    Provides a cable for attaching to the serial port of an RS/6000.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Prerequistes: Serial Attachment (#4250, 4252)
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#4342) AS/400 RS-232 Serial Cable (40 ft.)

    Provides a 40-foot RS-232 cable for attaching to the serial port of an AS/400.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Prerequistes: Serial Attachment (#4250, 4252)
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#4346) AS/400 RS-232 Serial Cable (100 ft.)

    Provides a 100-foot RS-232 cable for attaching to the serial port of an AS/400.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Prerequistes: Serial Attachment (#4250, 4252)
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#5612) PC Parallel Cable

    Provides a cable for attaching to the parallel port of PCs and compatibles.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Limitations: Cannot be used with Network Print Servers (#4121, 4124, 4164, or 4165) or LAN Attachment (#4260 or 4262)
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#5614) 1284 Parallel Bi-directional 15-ft. Cable

    Provides a cable for bi-directional parallel connection to the parallel port of PCs and compatibles.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Limitations: Cannot be used with Network Print Servers (#4121, 4124, 4164, or 4165) or LAN Attachment (#4260 or 4262).
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#8652) PC RS-422 Serial Cable

    Provides a cable for RS-422 serial connection to the serial port of PCs and compatibles.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Prerequisites: Serial Attachment (#4250, 4252).
    • Limitations: None.
    • Field installation: Yes.
    • Customer Setup: Yes.

    (#9386) PC RS-232 Serial Cable (20 ft.)

    Provides a cable for RS-232 serial connection to the serial port of PCs and compatibles.

    • Maximum Per 4247-003 or 4247-V03 printer: One
    • Maximum Order Quantity: Ten
    • Prerequisites: Serial Attachment (#4250, 4252).
    • Limitations: None.
    • Field installation: Yes.
    • Customer Setup: Yes.

    (R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

    ** Company, product, or service name may be a trademark or service mark of others.

    Windows is a trademark of Microsoft Corporation.
    IBM Corporation 2006.


    About us | Dynamic Testimonials | Employment | Site Map | Special Deals
    Copyright(c) 2006-2016 Argecy Computer Corporation - All rights reserved
    6016 W. Maple Road, Suite 710   West Bloomfield, Michigan 48322