I-O 5730e Ethernet-in/-out SCS print server
I-O 5730e (New)
The I-O 5730e is a high speed Ethernet-in, Ethernet-out SCS gateway print server designed to convert native IBM SCS host print jobs to PCL, allowing them to be printed by a laser or dot matrix printer on an Ethernet Network. Supporting one printer, the 5730e delivers IBM SCS printing via TCP/IP, providing the control and printer feedback found in an IBM host environment.
High Speed Printing
Attached to the Ethernet Network, the 5730e supports high-speed, high performance printers. Without the bottleneck of a slow parallel port, the 5730e supports over 100 pages per minute. Whether printing from an IBM can be obtained with laser printers supporting port 9100. In addition to the dot-matrix or laser printer.
Full Printing Control from IBM Host
The 5730e offers the same reliable, full-function IBM host printing and control print jobs are not lost in the black hole of LAN printing. The 5730e provides bi-directional communication between the printer and the IBM host, thus allowing error reporting and page-range printing.
Easy to Use
I-O's Configuration Utility software is included with every 5730e. Whether selecting TCP/IP or SNA, configuration is made easy through the use of a menu-based utility.
Ethernet Connection: Port 9100, PJL unsolicited messages, PCL 3/5e & 5c
Parallel Connections: Dot-Matrix / Laser
General: Supports One(1) Printer
Ethernet Connection: Auto-sensing 10/100BaseT
Printer Ports: One IEEE 1284 bi-directional Centronics parallel port
Power Supply: 100-240V auto-switching
Configuration: I-O Configuration Utility requires a Windows 2K or higher system
Features & Benefits
High Speed Printing, 100+ ppm: Data conversion is accomplished at the 5730e and sent to the printer via the Ethernet Network. The 5730e takes advantage of high- speed, high-performance printers without the bottleneck of a parallel port.
Supports one(1) Attached LAN Printer: One(1) laser or dot matrix printer can be configured as an SCS virtual printer.
SCS Printing: IBM host printing to LAN attached printers can be accomplished easily in an Ethernet environment.
Full IBM Control of Print Jobs: The 5730e provides a bi- directional communication between the host and the printer, via port 9100 and PJL commands.
Remote Printing: The printers can be attached remotely or via a WAN or VPN network. Printer does not need to be next to the 5730e.
One Parallel Port: One laser or dot-matrix printer can be directly attached to the 5730e for IBM host or LAN print jobs.
I-O's Award Winning Printer Emulations: All SCS functions such as Duplex, Page Offset, COR, and Fonts are fully supported by the 5730e.
|About us | Dynamic Testimonials | Employment | Site Map | Special Deals|
Copyright(c) 2006-2016 Argecy Computer Corporation - All
6016 W. Maple Road, Suite 710 West Bloomfield, Michigan 48322