InfoPrint 1968 MFP 4858-T01
Fully refurbished with 90-day warranty
InfoPrint 1968 MFP (machine type 4858) offers multifunction capabilities for departmental printing
This new monochrome multifunction printer offers printing speeds of up to 45 pages per minute (ppm)1 on letter media and up to 45 ppm1 on A4 media. Other benefits of the InfoPrint 1968 MFP include:
1 Exact print speeds vary depending on document complexity, system configuration, software applications, driver, and printer status.
Standard Maximum Gigabit
The t01 model includes two 500-sheet drawers plus additional two 500-sheet drawers and a 100-sheet multipurpose feeder (MFP) for a total input capacity of 2,100 sheets standard. One optional input source is supported for a total maximum input capacity of 4,100 sheets. Standard output capacity is 500 sheets with a maximum output capacity of 3,800 sheets.
All models have one slot for additional SDRAM memory. Memory options for the printer include 256 MB, 512 MB, or 1024 MB memory DIMMs. All models have one slot for the optional 256 MB flash memory card. An 80 GB hard drive comes standard.
All models include internal 1000BaseTX (Gigabit Ethernet) as standard.
The internal wireless feature allows the printer to be connected directly to a wireless LAN. This supports the IEEE 802.11b, 802.11g, and 802.11n draft 2.0 standards. Draft 2.0 refers to the version of the not-yet-ratified IEEE 802.11n standard.
The maximum monthly usage for the InfoPrint 1968 MFP is 200,000 impressions. InfoPrint Solutions Company does not recommend printing to the monthly maximum on a consistent basis.
The print resolutions supported by the printer are:
2 The 2400 Image Quality (IQ) enhancement is a special print mode designed to vary the intensity of each individual printed dot by manipulating its size to produce the appearance of greater print resolution within the limitation of a set number of dots per inch (dpi).
The toner darkness setting offers 10 user-selectable settings to balance print darkness and toner savings. The higher the setting, the darker the print (that is, level 1 is the lightest). The printers ship with a default setting of 8. Level 8 to level 1 offers up to 50% toner savings, thus reducing the cost of printing. The toner darkness setting is available through the operator panel under the Quality menu and also accessible from the print driver.
Note: Due to limitations of the printing technology, setting 9 and 10 do not provide darker print than the default setting of 8.
The InfoPrint 1968 MFP printer resident fonts include support for the following:
Emulation Number of scalable fonts Number of bitmapped fonts
The fonts in the PCL emulation are compatible with the fonts in the HP LaserJet 4550, and include nine additional fonts and many extra symbol sets to support extra languages and applications. Included in the PCL emulation are OCR-A, OCR-B, and Code 3 of 9 barcode fonts. The fonts in the PostScript" emulation are compatible with all 136 fonts in Adobe" PostScript 3 and include 22 additional fonts.
Additional fonts can be downloaded to the printer RAM, optional user flash, or the hard disk.
The CD-ROM shipped with the printer includes screen fonts to match the printer's resident scalable fonts. The Software and Documentation CD also contains a variety of downloadable fonts for Hebrew and Arabic.
The printer supports the following features:
Accessibility by people with disabilities
For hardware offerings
The following features support use by people with disabilities:
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from InfoPrint Solutions Company, you may link directly to Business Partner information for this announcement. A PartnerWorld" ID and password are required (use IBM" ID).
All hardcopy publications are downloadable from the InfoPrint Solutions Company Web site
The following publications are shipped with the products:
Software and Documentation CD
User's Guide (contained on CD)
The User's Guide will be available in the following languages: Arabic, English, Danish, Dutch, Finnish, French, German, Hebrew, Italian, Korean, Norwegian, Polish, Brazilian Portuguese, Romanian, Russian, Spanish, Swedish, Simplified Chinese, Traditional Chinese, and Turkish.
The operator panel will be available in the following languages: English, Danish, Dutch, Finnish, French, German, Italian, Norwegian, Polish, Brazilian Portuguese, Russian, Spanish, Swedish, Turkish, Simplified Chinese, Traditional Chinese, Korean, and Japanese
Specified operating environment
Width Depth Height Weight
3 Lowering MPF tray adds 210 mm (8.3 in), lowered and fully extended adds 330 mm (13.0 in).
Minimum clearance requirements
Left side Right side Front Rear Top
Storage and shipping environment (packed)
Storage and shipping environment (unpacked)
Average power consumption
The following table specifies nominal average power requirements for the base printer configuration for InfoPrint 1968 MFP.
Printing states Power
All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1 meter average Declared
This printer is designed as Customer Setup Unit (CSU). The customer is responsible for:
It is the customer's responsibility to order and maintain an adequate inventory of toner cartridges and maintenance supplies.
No attachment cables are required for this feature.
No supplies are required with the machine order. InfoPrint 1968 MFP is shipped with 35,000-impressions4 print cartridge. Refer to the following table for replacement print cartridges. It is the customer's responsibility to order and maintain an adequate inventory of toner cartridges and maintenance supplies.
The following replacement supplies are available for InfoPrint 1968 MFP:
4 Approximate yield has been established with an average coverage of 5%. An impression is defined as one printed side of a sheet. A duplex sheet would consist of two impressions.
5 Yield based on an average of six pages per job and approximately 5% coverage per page. Yields may vary based on actual customer usage.
The approximate average yields are not a warranty or guarantee of minimum life, and are provided to assist in initial supplies planning. Actual usage should be used to establish the supply's life in the end user's application. Many factors (for example, print coverage per page, machine settings, paper type and size, and environmental conditions) can affect supply life.
The following maintenance supplies are available for InfoPrint 1968 MFP:
Description Models Part number Approximate average yield
All maintenance supplies are customer installable. Installation services are available at InfoPrint Solutions Company's current billable service rate for this product, with a one-hour minimum. The maintenance kits must be purchased separately by the customer before contacting InfoPrint Solutions Company for installation.
Supply warranties are only for defects in materials and workmanship at the time of shipment and installation. They are not for print count life or normal wear and tear, nor for any print count minimum. Contact your place of purchase for warranty return instructions.
InfoPrint Solutions Company is committed to environmentally conscious programs for printer supplies. A collection program for used printer cartridges has been established and return instructions are included in the supply item packaging, with free return shipping.
InfoPrint Solutions Company printing supplies are distributed by Priority Fulfillment Services (PFS) and a worldwide network of resellers. End users can contact PFS at 888-IBM-PRINT (426-7746) for the name of an InfoPrint Solutions Company reseller in their area where printing supplies can be purchased.
Resellers can mail orders for InfoPrint Solutions Company printing supplies to PFS at the following address:
Priority Fulfillment Services
To contact PFS, call (United States) 972-881-0733 ext. 3234.
The pallet quantity for InfoPrint 1968 MFP is one printer per pallet.
Security, auditability, and control
This product uses the security and auditability features of the host hardware, host software, and application software.
The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
IBM Global Financing
If required, InfoPrint Solutions Company provides repair or exchange service depending on the types of warranty service specified for the machine. InfoPrint Solutions Company will attempt to resolve your problem over the telephone, or electronically via an InfoPrint Solutions Company Web site. You must follow the problem determination and resolution procedures that InfoPrint Solutions Company specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service.
Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside InfoPrint Solutions Company's normal service area. Contact your local InfoPrint Solutions Company representative or your reseller for country- and location-specific information. This product is covered by the following types of service.
Customer Replaceable Unit Service and On-site for other selected parts.
CRU: InfoPrint Solutions Company provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from InfoPrint Solutions Company upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.
Tier 1 CRU: Installation of Tier 1 CRUs is your responsibility. If InfoPrint Solutions Company installs a Tier 1 CRU at your request, you will be charged for the installation.
Tier 2 CRU: You may install a Tier 2 CRU yourself or request InfoPrint Solutions Company to install it, at no additional charge.
Based upon availability, CRUs will be shipped for next-business-day delivery. InfoPrint Solutions Company specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to InfoPrint Solutions Company. When return is required, (1) return instructions and a container are shipped with the replacement CRU and (2) you may be charged for the replacement CRU if InfoPrint Solutions Company does not receive the defective CRU within 15 days of your receipt of the replacement.
The following parts have been designated as Tier 1 CRU parts:
6 All furniture products will have a one year (12 months) warranty with delivery of this warranty through replacement CRUs shipped direct to the customer for customer installation. After the one year warranty, repair or replacement of the furniture is customer responsibility.
Standard tier 1 CRU items listed would not apply if the specific product does not include that function or feature.
On-site Service: InfoPrint Solutions Company will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the machine. The area must be clean, well lit, and suitable for the purpose.
Warranty and maintenance
Hourly service class
Warranty service upgrades
ServicePacs for warranty and maintenance options
Refer to the Prices section for U.S. ServicePac" offerings.
Usage plan machine
When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.
Customer setup. Customers are responsible for installation according to the instructions InfoPrint Solutions Company provides with the machine.
Graduated program license charges apply
Licensed internal code and licensed machine code
This product does not contain Licensed Internal Code or Licensed Machine Code.
Educational allowance does not apply.
All features are both plant and field installable. All features apply to all models listed below.
Mach Feature Part
For additional information on maintenance and pricing, please contact your InfoPrint Solutions Sales Representative or your InfoPrint Solutions Business Partner, or call 1-800-IBM-CALL (1-800-426-2255).
IPDS is a trademark of Ricoh Co., Ltd. in the United States, other countries, or both.
InfoPrint and Ricoh are registered trademarks of Ricoh Co., Ltd. in the United States, other countries, or both.
Ricoh is a registered trademark of Ricoh Co., Ltd. and its affiliated companies.
PostScript and Adobe are registered trademarks of Adobe Systems Incorporated in the United States, and/or other countries.
PartnerWorld, IBM and ServicePac are registered trademarks of IBM Corporation in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service marks of others.
InfoPrint Solutions Company LLC ("InfoPrint") products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. InfoPrint Solutions Company LLC ("InfoPrint") reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only.
|About us | Dynamic Testimonials | Employment | Site Map | Special Deals|
Copyright(c) 2006-2016 Argecy Computer Corporation - All
6016 W. Maple Road, Suite 710 West Bloomfield, Michigan 48322