1-888-742-9565
 248-324-1800

   sales@argecy.com

Why trust us?
  
  • My Account
  • My Purchase Cart 
  • My Lease Cart
  •   
    Site Map
    Real inventory that we refurbish and stand behind, since 1985.
  • Connectivity
  • Consumables and Supplies
  • Document Scanners
  • IBM Disk and Tape Drive Systems
  • Parts for Printers, MFPs, and Scanners
  • Printers and MFPs
  • Projectors and Whiteboards
  • Service and Repair
  • Software and Applications
  • Thin Clients, Terminals, and Displays
  • Attention Dealers and Repeat customers: Discounts may be available based on your log-in. Call or Email for information.



      


    IBM Infoprint Color 1567 (4935)

     
     
     
     


    IBM Infoprint 1567 Printer
    IBM 4935-N01 Infoprint Color 1567n
    Fully refurbished with 90-day warranty
    4935-N01 39v0008
    $1995.00




    Looking for IBM Infoprint 1567 Parts?
    The IBM 4935 Infoprint Color 1567 is a replacement for the Infoprint Color 1357. The 1567 is a wide format (A3) color printer capable of printing at speeds up to 32 ppm color (letter/A4) or 36 ppm monochrome (letter/A4)(1).

    75P6872 Toner Cartridge, Cyan 14,000
    75P6872 IBM Toner Cartridge, Cyan
    New
    75P6872 14000 Page Yield (New)
    $245.00


    75P6873 Toner Cartridge, Magenta 14,000
    75P6873 IBM Toner Cartridge, Magenta
    New
    75P6873 14000 Page Yield (New)
    $245.00


    75P6874 Toner Cartridge, Yellow 14,000
    75P6874 IBM Toner Cartridge, Yellow
    New
    75P6874 14000 Page Yield (New)
    $245.00


    75P6875 Toner Cartridge, Black 15,000
    53P9397 Color Photodeveloper Kit (contains 1 each - cyan, magenta, yellow) 28,000
    53P9398 Black Photodeveloper Kit 28,000
    39V0298 Oil Coating Roller 14,000
    39V0298 Oil Coating Roller
    New
    39V0298 15000 Page Yield (New)
    $28.00


    28P2019 Staple Cartridges w/ Staples (3) 3,000 x 3
    39V2608 Transfer Belt 120,000
    39V2608 IP 1567 Transfer Belt
    New
    39V2608 (New)
    $775.00


    39V2606 Fuser Unit 105,000
    39V2606 IP 1567 Fuser Unit (115V)
    New
    39V2606 (New)
    $675.00


    39V0230 550-Sheet Drawer
    39V0230 550-Sheet Drawer with Tray
    Fully refurbished with 90-day warranty
    39V0230
    $399.00


    39V0231 550-Sheet Banner Media Tray
    39V0232 High Capacity Feeder
    39V0247 2x550-Sheet Drawer with Base

    39V0247 2x550 Sheet Drawer with Base
    Fully refurbished with 90-day warranty
    39V0247


    39V0248 Duplex Unit
    39V0248 Duplex Unit
    Fully refurbished with 90-day warranty
    39V0248
    $171.00



    39V0248 Duplex Unit
    New
    39V0248 (New)
    $695.00


    39V0249 Staple/Punch Finisher (3 hole)
    39V0249 Staple/Punch Finisher (3 Hole)
    Fully refurbished with 90-day warranty
    39V0249


    75P6986 128 MB SDRAM DIMM

    75P6986 Infoprint Brand 128 MB Memory DIMM
    Fully refurbished with 90-day warranty
    75P6986
    $39.00



    75P6986 128 MB Memory DIMM
    New
    75P6986 Compatible (New)
    $123.00


    75P6987 256 MB SDRAM DIMM

    75P6987 Infoprint Brand 256 MB Memory DIMM
    Fully refurbished with 90-day warranty
    75P6987
    $186.00



    75P6987 256 MB Memory DIMM
    New
    75P6987 Compatible (New)
    $152.00


    75P6988 512 MB SDRAM DIMM
    75P6988 Infoprint Brand 512 MB DIMM
    New
    75P6988 (New)
    $592.00



    75P6988 Infoprint Brand 512 MB Memory DIMM
    Fully refurbished with 90-day warranty
    75P6988
    $285.00



    75P6988 512 MB DIMM
    New
    75P6988 Compatible (New)
    $161.00


    75P6989 32 MB Flash Card Memory
    75P6989 32MB Flash Memory
    New
    75P6989 (New)
    $95.00



    75P6989 32MB Flash Memory
    Fully refurbished with 90-day warranty
    75P6989
    $35.00


    75P6990 64 MB Flash Card Memory
    75P6990 64MB Flash Memory
    New
    75P6990 (New)
    $285.00


    75P5008 20+GB ISP Hard Disk w/Adapter
    75p5008 20+GB Hard Disk with Adapter
    New
    75p5008 (New)
    $499.00


    75P6992 Ethernet 1000BaseTX
    75P6857 802.11g Wireless to Ethernet
    75p6857 802.11g wireless to Ethernet
    Fully refurbished with 90-day warranty
    75p6857
    $190.00


    28P1875 2-meter USB Cable
    75P6854 802.11g Wireless to USB
    28P1871 10 ft. Parallel Cable
    28P1871 10 ft. Parallel Cable 1284
    Fully refurbished with 90-day warranty
    28p1871
    $19.00


    28P1836 Token-Ring-3 port
    28P1836 Token-Ring-3 Port
    New
    28P1836 (New)
    $285.00


    28P1839 Ethernet 10/100BaseTX-1 port
    28P1839 Ethernet 10/100BaseTX-1 Port
    Fully refurbished with 90-day warranty
    28P1839
    $266.00


    39V0251 Printer Cabinet
    39V0252 Printer Base
    39V0252 1567 Printer Base
    New
    39V0252 (New)
    $214.00


    39V0324 Card for IPDS and SCS/TNe
    39V0324 Card for IPDS and SCS/TNe
    New
    39V0324 (New)
    $475.00



    39V0324 Card for IPDS and SCS/TNe
    Fully refurbished with 90-day warranty
    39V0324
    $475.00


    39V0325 Decryption Card
    39V0326 Serial Interface Card
    39V0327 Parallel 1284-B Interface Card

    Model Abstract 4935-N01

    The IBM 4935 Infoprint Color 1567 network low voltage printer Model N01 has a 1 GHz RISC processor. It provides robust data stream support with PostScript 3 emulation and PCL 6 emulation standard.

    The Infoprint Color 1567 printer provides:

    • Up to 36 ppm mono (letter), 32 ppm color (letter)
    • High function, easy to use operator interface
    • Automatic calibration and registration for print quality consistency
    • Maximize color output quality using brightness, contrast and saturation adjustments
    • Toner saver, color saver, coverage estimator and "proof then print" features allow efficient management of supplies, cost of output and waste
    • Convenient USB Direct Port for printing PDF files at the printer
    • Standard ImageQuick feature enables PDF, JPEG and TIFF documents that are stored on a web page to be printed at the printer
    • Enhanced security with device passwords, PIN printing capability, secure transmission protocols and disk drive encryption
    • Effectively install and proactively manage network attached devices through the embedded web server or with MarkVision Professional

    Description

    The Infoprint Color 1567 is a high performance departmental color printer that is designed for productivity to meet the needs of medium and large workgroups. The printer's excellent 2400 Image Quality prints crisp text and high quality graphics. The Infoprint Color 1567 effectively prints applications within the general office including departmental printing, engineering drawings, scientific drawings, marketing materials presentations and on demand brochures.

    Customers can take total control of their color output using powerful device features that limit access to color printing by user or by specifying times that the device can be accessed. Color quality can be maximized by using color brightness, contrast and saturation adjustments. Color output costs can be managed by using toner saver, color saver, and the coverage estimator.

    Increase productivity by using the intuitive all points addressable operator panel that provides easy to use navigational menus and "show me" graphics and text that communicate printer status and simplify problem resolution. By using the powerful user interface and the standard ImageQuick solution, frequently accessed monochrome and color documents (PDF, TIFF & JPEG) can be stored on a web site and printed on demand at the printer. Secure walk-up printing of PDF documents can be easily accommodated by using the USB direct port and a USB flash memory device.

    Standard and optional features on the Infoprint Color 1567 enhance device and document security. PIN-based printing increases confidentiality for individuals printing sensitive output. Data that is stored on the optional hard disk is encrypted. Security of transmission is addressed through secure transmission protocols.

    A wide variety of media sources can be configured to meet specific customer needs including additional 550 sheet input drawers and a 3,000 sheet high capacity feeder option. The optional 1100 sheet finisher provides flexible finishing including stapling, offset stacking and hole punching.

    Flexible connectivity options ensure that the Infoprint Color 1567 can be configured to adapt to a customer's existing or future infrastructure. The embedded web server and MarkVision Professional device management utility enable flexible installation and proactive device management from a desktop, server or web browser.

    The IBM Infoprint Color 1567 is an A3/Ledger color LED printer with print speeds of up to 36 pages per minute (ppm) monochrome and 32 ppm color for letter/A4. The printer comes as a network model only.

    Its media handling capabilities include:

    • One 550-sheet tray and one 100-sheet mutipurpose feeder standard for a total of 650 sheets standard input capacity.
    • Up to 3 stackable optional 550-sheet drawers and one 3,000-sheet high-capacity feeder for a maximum 5,300 sheets input capacity.
    • Optional duplex for two-sided printing.
    • One 550-sheet face-down output bin and one 100-sheet face-up output bin standard for a total of 650 sheets standard output capacity.
    • Optional staple/punch finisher with 1,100-sheet output capacity and 1,650 sheets maximum output capacity. It requires either printer cabinet or 2x550-sheet Drawer with Base or two 550-sheet Drawers and Printer Base as prerequisites.

    Usage Rates

    The maximum monthly usage is 200,000 impressions. IBM does not recommend printing to the monthly maximum on a consistent basis.

    High-Performance Controller

    The Infoprint Color 1567 controller has a 1 GHz RISC processor. It provides robust data stream support with PostScript 3 emulation and PCL 6 emulation standard.

    Memory:

    There are two slots available for SDRAM memory and flash memory. The printer comes with 256 MB of memory standard which uses one of the memory slots. Optional 256 MB and 512 MB SDRAM DIMMs are available. The controller supports a maximum of 1,024 MB of SDRAM memory using two 512MB SDRAM DIMMs (in this case, the 256 MB of standard SDRAM memory must be replaced with a 512 MB SDRAM DIMM).

    Two flash memory options are available, 32 MB flash card memory and 64 MB flash card memory. A maximum of 64 MB of flash memory is available.

    Printer system attachment interfaces:

    • The printer comes standard with a parallel interface, a USB interface, and an integrated 10/100BaseTX Fast Ethernet interface.
    Slots for additional features:

    There are three slots available for other features:

    • One slot for application solution features such as IPDS.
    • One slot for an optional hard disk feature.
    • One slot for optional network interfaces.

    Print Quality

    The Infoprint Color 1567 supports 2400 Image Quality resolution.

    The Toner Darkness setting offers five user-selectable levels to balance your needs for print darkness and toner savings. The higher the value selected, the darker the print (level 5 is the darkest setting). On the other hand, a lower number means more toner savings (level 1 is the lightest setting). Level 4 is the default setting.

    The printer offers up to 50% toner savings with a setting of "1," up to 35% toner savings with a setting of "2," and up to 20% toner savings with a setting of "3," thus reducing the cost of printing.

    The Toner Darkness menu is available through the operator panel under the Print Quality menu.

    Font Support for Infoprint Color 1567

    The printer's resident fonts include support for the following:

    Emulation # of Scalable Fonts # of Bitmapped Fonts
    ------------ ------------------- --------------------
    PCL 6 89 2
    PostScript 3 158 0
    PPDS 39 5

    List of all features supported by the Infoprint Color 1567 Printer

    Part
    Number Description
    ------- ----------------------------------
    39V0230 550-Sheet Drawer
    39V0231 550-Sheet Banner Media Tray
    39V0232 High Capacity Feeder
    39V0247 2x550-Sheet Drawer with Base
    39V0248 Duplex Unit
    39V0249 Staple/Punch Finisher (3 hole)
    75P6986 128 MB SDRAM DIMM
    75P6987 256 MB SDRAM DIMM
    75P6988 512 MB SDRAM DIMM
    75P6989 32 MB Flash Card Memory
    75P6990 64 MB Flash Card Memory
    75P5008 20+GB ISP Hard Disk w/Adapter
    28P1836 Token-Ring-3 port
    28P1839 Ethernet 10/100BaseTX-1 port
    75P6992 Ethernet 1000BaseTX
    75P6857 802.11g Wireless to Ethernet
    75P6854 802.11g Wireless to USB
    28P1871 10 ft. Parallel Cable
    28P1875 2-meter USB Cable
    39V0251 Printer Cabinet
    39V0252 Printer Base

    Accessibility by people with disabilities

    For hardware offerings

    The following features support use by people with disabilities:

    • Controls and latches are operable with one hand and minimal dexterity.
    • Keys are discernible by touch without activating them.
    • The display, controls, latches, and levers are accessible to someone in a wheel chair.
    • Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.

    Performance Specifications

    The Infoprint Color 1567 maximum print speeds are shown in the following table. Actual performance depends on:

    • Interface to the host (serial, USB, or network)
    • Host system and application
    • Page complexity and content
    • Certain printer options installed and selected
    • Printer memory
    • Printer resolution
    • Media size

    Maximum Print Speeds (mono/color)

    Standard High Capacity Multi-purpose
    Media Drawer Feeder Feeder (MPF)(4)
    ------------------- --------- ------------- ---------------
    Simplex Printing(1)
    (pages per minute)
    Letter-LEF 36/32 ppm 36/32 ppm 36/32 ppm
    Letter-SEF NS NS 28/25 ppm
    Ledger-SEF 20/17 ppm NS 20/17 ppm
    Legal-SEF 23/20 ppm NS 23/20 ppm
    A3-SEF 20/17 ppm NS 20/17 ppm
    A4-LEF 36/32 ppm 36/32 ppm 36/32 ppm
    A4-SEF NS NS 27/23 ppm
    A5-LEF NS NS 49/43 ppm
    A5-SEF NS NS 36/32 ppm
    B4-SEF 22/20 ppm NS 22/20 ppm
    B5-LEF NS NS 41/36 ppm
    B5-SEF NS NS 31/27 ppm
    Transparencies-LEF 22/6.6ppm NS 22/6.6ppm
    Cardstock-LEF(2) 13.7 ppm NS 13.7 ppm
    Envelopes-LEF NS NS 13.7 ppm
    Paper Labels(3) 22 ppm NS 22 ppm

    Duplex Printing(1)
    (pages per minute)
    Letter-LEF 21/19 ppm 21/19 ppm 21/19 ppm
    Ledger-SEF 12/11 ppm NS 12/11 ppm
    Legal-SEF 14/12 ppm NS 14/12 ppm
    A3-SEF 12/11 ppm NS 12/11 ppm
    A4-LEF 21/19 ppm 21/19 ppm 21/19 ppm
    A4-SEF NS NS 15/13 ppm
    A5-SEF NS NS 21/19 ppm
    A5-LEF 23/20 ppm NS 23/20 ppm
    B4-SEF 13/12 ppm NS 13/12 ppm
    B5-SEF NS NS 20/17 ppm
    B5-LEF NS NS 22/20 ppm
    Transparencies-LEF NS NS NS
    Cardstock-LEF(2) NS NS NS
    Envelopes-LEF NS NS NS
    Paper Labels(3) NS NS NS

    Note: LEF = Long Edge Feed.
    Note: SEF = Short Edge Feed.
    Note: NS = Not Supported.
    Note: (1) Speeds are for 2400 IQ using plain paper setting. Actual speeds may vary with other media type settings.
    Note: (2) Heavy cardstock is 165 gsm, 216 gsm for MPF.
    Note: (3) Please refer to Cardstock and label guide for media guidelines.
    Note: (4) Folio and statement paper supported from MPF only.

    Time to First Print

    Simplex printing from tray one is rated at 9.5 seconds mono and 13.5 seconds color.

    Warm Up Time

    Mode Quickstart Standby Warm-Up (sec)
    ----------- ---------- ------- -------------
    Power On Off N/A 145
    Power Saver On Off 120
    Power Saver Off On 120
    Power Saver Off On 0

    Print Area

    The Infoprint Color 1567 printable area is limited to within 4.0 mm (0.158 in.) of top, bottom, left or right edges of the media. Any information placed outside this specified printable area will not print.

    Operator Panel Information

    Four-line160x64mm APA backlit gray scale display: Non-double byte languages use a proportional font, supporting four lines with 20 characters per line maximum. Double byte characters, at 16x16 pixels in size, support four lines of 10 characters per line maximum.

    Numeric Pad

    The numeric pad consists of numbers, a pound (#) sign, and a backspace button. The "5" button has a raised bump for non-visual orientation.

    Two-Toned LED

    The two-toned LED button is green and the lighting/flash pattern is:
    Blinking green: Device warming up, processing data, or printing
    Solid red: User intervention occurring or required
    Solid green: Ready state

    Navigational Elements

    An intuitive grouping of navigation elements is placed close to the display panel. Up/Down navigation arrows navigate up and down lists. Left/Right buttons navigate within the screens.

    User Workflow Separated from Administration/Configuration

    User and print job related workflow is accessed via the Home screen. Administrative related workflow is accessed via the Menu button.

    Home States

    There are two Home States: HomePrime and HomeStatus. HomePrime is the legacy "Ready" state. HomeStatus is the legacy "Busy" state.

    Toner at A Glance

    A graphical representation of toner cartridge levels is available.

    Show Me

    Additional information is provided for a select group of required user interventions via a "Show me" selection. "Show me" selections contain detailed steps (graphics and text) that instruct the user how clear the specified intervention.

    Tell Me More

    Additional information is provided for a select group of user interventions via a "Tell me more" selection. "Tell me more" selections contain more detail about the specific, such as why it has occurred and/or what the user can do to clear the intervention.

    Print Quality

    General Statement on Print Quality

    The Infoprint Color 1567 will provide superior print quality and feed reliability when using paper designed for use with xerographic copiers and laser printers. During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure high quality printing and good performance throughout the life of the printer.

    Printer Default Settings

    The default settings for the Infoprint Color 1567 are listed below:

    Setting
    ---------------- ---------
    Toner Darkness 4
    Print Mode Color
    Printer Usage Max Speed
    Print Resolution 2400IQ
    Color Correction Auto

    Resolution

    The following resolutions or print quality modes can be selected:

    Name Bits/Pixel Engine Mode
    ------------------ ---------- -----------
    2400 Image Quality 4 600x600

    Image Enhancement Settings

    Infoprint Color 1567 will NOT offer any end-user selectable Image Enhancement Settings. A 4-bit image enhancement that enhances the entire page will be applied.

    Fuse Grade Specification

    Fuse grade will be evaluated on many types of media in accordance with the Engine Specification

    Print Mode

    Infoprint Color 1567 will support both a color and mono print mode. The default print mode will be color. In the color mode, all four photodevelopers are in contact with the belt. In the mono print mode the transport belt will be oriented so that the color supplies are not engaged while printing. In order to print using only black toner, select the Black/White check box in our driver. If a non-IBM driver is used, the default print mode must be changed to black only at the op panel or via the printer Web site. Several seconds are required to switch between these modes. Mono or color print mode will be operator selectable.

    Printer Darkness Settings

    The Toner Darkness setting offers five user selectable settings to balance print darkness and toner savings. The higher the setting the darker the print. Within the range of print darkness settings up to 50% toner savings can be realized from the factory default setting of 4. The Toner Darkness setting is available through the operator panel under the "Print Quality" menu. Available in PostScript and PCL/XL jobs.

    Color Correction Settings

    The Infoprint Color 1567 will offer the following color correction settings:

    Auto (default)

    Applies different color correction to each object on the printed page depending upon the type of object and how the color for each object is specified.

    Manual

    Allows users to customize color correction output from the Op Panel. Setting selectable from the Driver.

    Off

    No Color correction is implemented.

    "Auto/default" Color Correction Setting

    Incoming Color Format Color Correction Output
    --------------------- -----------------------
    RGB Graphics sRGB Vivid
    RGB Image sRGB Display
    RGB Text sRGB Vivid
    CMYK Graphics US CMYK/Euro CMYK
    CMYK Image US CMYK/Euro CMYK
    CMYK Text US CMYK/Euro CMYK

    "Manual" Color Correction Output Op Panel Selections

    Color Correction Output Selections
    Incoming Color Format Default Other
    --------------------- ------------------ ----------------------------
    RGB Graphics sRGB Vivid Vivid, sRGB Display, Off,
    Display-True Black
    RGB Image sRGB Vivid Vivid, sRGB Display, Off,
    Display-True Black
    RGB Text sRGB Vivid Vivid, SRGB Display, Off,
    Display-True Black
    CMYK Graphics Euro CMYK, US CMYK Vivid CMYK, Off
    CMYK Image Euro CMYK, US CMYK Vivid CMYK, Off
    CMYK Text Euro CMYK, US CMYK Vivid CMYK, Off

    "Manual" Color Correction Output Selection Definitions

    Vivid

    Applies a color correction algorithm that produces brighter, more saturated colors. May be selected for all incoming color formats.

    SRGB Display

    Applies color correction to produce output that approximates the colors displayed on a computer monitor. Black usage is optimized for printing photographs.

    SRGB Vivid

    Increased color saturation for the sRGB Display color correction. Black usage is optimized for printing business graphics.

    Off

    Off: No color correction is implemented.

    US CMYK

    Applies color correction to approximate SWOP color output.

    Vivid CMYK

    Increased color saturation for the US CMYK color correction.

    Euro CMYK

    Applies color correction to approximate EuroScale color output.

    Display-True Black

    Applies color correction to product output that approximates the colors displayed on a computer monitor. This option creates output using only black toner for all levels of neutral gray, where most other color options create gray using a composite of cyan, magenta, yellow and black toner.

    Color Balance Settings

    Infoprint Color 1567 offers a Color Balance Control. It is a color correction option that allows the user to increase or decrease the amount of toner going to the page individually for the cyan, magenta, yellow and black color planes. The scale adjustment is +5 to -5.

    Coverage Estimator

    The IBM Coverage Estimator is designed to give the user an approximation of percent coverage per color when printing a composite color document. The estimation of coverage can be used to calculate an approximate cost of any given document if yield and coverage are assumed to be inversely related. This tool should allow customers to discover for themselves that printing color documents on color LED printers is frequently an economical way to create these documents. Furthermore, they can discover that many black and white documents can be improved for a nominal increase in cost. The Coverage Estimator allows end users to estimate the percent coverage of cyan, magenta, yellow and black on one separator page for each job with average coverage information. The Coverage Estimator is available from the Op Panel under the "Utilities Menu."

    The Coverage Estimator utilizes an algorithm that counts pixels for each toner color: black, cyan, magenta and yellow. Once the utility is selected, the printer overlays the percent coverage on each separator page. The printed percentages are not included in the estimate. The utility can be turned off by deselecting it from the menu or by powering off.

    The Coverage Estimator is intended to only estimate the coverage on a given page. For all toner colors that are used, the minimum percentage reported will be two percent. Reported values may vary from printer to printer. The accuracy of the estimates may be affected by the fullness of the print cartridges, environmental conditions, media type, application, application settings, driver, driver settings, or the content of the page. IBM makes no claim as to the accuracy of the estimated percentages.

    Color Samples

    To assist users in selecting the colors to be printed, they can print color samples pages for each of the RGB and CMYK color conversion tables used in the printer. The color samples pages consist of a series of colored boxes along with the RGB or CMYK combination that creates the color observed for each particular box. These pages can be useful in helping users decide which RGB or CMYK combinations to use in their software applications to create the desired printed color output.

    Color Saver Mode

    Infoprint Color 1567 offers a Color Saver Mode that allows end users to print images and graphics lighter. Text will print at Toner Darkness "4," while images and graphics print at Toner Darkness '1.' The Color Saver Mode is located on the Op panel under the Color Menu and may be selected from from the IBM Custom PostScript Driver. The Color Saver feature is available in PostScript and PCL/XL jobs.

    Enhance Fine Lines

    In this feature, setting this option to TRUE has the effect of more faithfully representing fine detail in jobs, such as fine lines in CAD drawings. The default is false.

    Fonts and Symbol Sets

    Emulation # of Scalable Fonts # of Bitmapped Fonts
    ------------ ------------------- --------------------
    PCL 6 89 2
    PostScript 2 158 0
    PPDS 39 5

    The fonts in the PCL emulation are compatible with the fonts in the HP Color LaserJet 5550 and include nine additional fonts and many extra symbol sets to support extra languages and applications. Included in the PCL emulation are OCR-A, OCR-B and Code 3 of 9 barcode fonts. The fonts in the PostScript emulation are compatible with all 136 fonts in Adobe PostScript 3 and include 22 additional fonts.

    Additional fonts can be downloaded to the printer RAM, optional User Flash cards or optional Disk drive. The PCL emulation supports both scalable and bitmapped downloadable fonts. The PostScript emulation supports only downloadable scalable fonts.

    Included on the CD-ROM shipped with the printer are screen fonts to match the printer's resident scalable fonts. The CD-ROM also includes a variety of downloadable fonts for Hebrew and Arabic.

    Support for the euro currency character is included in all applicable fonts for both the PostScript and PCL emulations. Twelve of the PCL symbol sets support the euro character including all seven Windows symbol sets.

    The printer code includes special font compatibility modes in both the PostScript and PCL emulations for backward compatibility.

    The printer supports Unicode printing with special UTF-8 encodings in both the PCL and PostScript emulations. UTF-8 encoding is a particular way to access characters that is very useful for fonts with large character sets. UTF-8 is used by our SAP printing solution.

    Data Streams

    The Infoprint Color 1567 supports the following data streams:
    PostScript Level 3 Emulation
    PCL 6 Emulation
    PCL 5C Emulation
    PDF 1.5
    PPDS (Page Printer Data Stream) Migration Tool

    Media Support

    Infoprint Color 1567 comes standard with one 550-sheet paper drawer and one 100-sheet multipurpose feeder. One 550-sheet face down output bin and one 100-sheet face up output bin are standard. See tables below for standard and maximum media capacities.

    Input Media Capacities (sheets)

    High Cap. Total
    MPF Drawer 1 Drawer 2 Drawer 3 Drawer 4 Feeder Capacity
    -------- -------- -------- -------- -------- --------- --------
    Standard 100 550 650

    Maximum 100 550 550 550 550 3000 5300

    Output Media Capacities (sheets)

    Standard (1) Optional
    Face Down Face Up Finisher Total
    Output Bin Output Bin Output Bin Capacity
    ---------- ---------- ---------- --------
    Standard 550 100 650

    Maximum 550 100 1000 1650

    Note: (1) This is either the standard face up output bin or the finisher face up output bin if the finisher is installed.

    Media Sizes Supported

    Input Media

    550- High
    MPF Sheet Capacity
    Paper Size & Type Tray Drawer Feeder Duplex
    ------------------------ ---- ------ -------- ------
    A4 (210x297 mm) Yes Yes Yes Yes
    Letter (8.5"x11") Yes Yes Yes Yes
    A5 (148x210 mm) Yes No No Yes
    B5-JIS (182x257 mm) Yes No No Yes
    B4-JIS (364x252 mm) Yes Yes No Yes
    Legal (8.5"x14") Yes Yes No Yes
    Executive (7.25"x10.5") Yes No No Yes
    Ledger (11"x17") Yes Yes No Yes
    Tabloid (11"x17") Yes Yes No Yes
    A3 (297x420 mm) Yes Yes No Yes
    Banner (297x914 mm) Yes No No No
    Banner (297x1219 mm) Yes No No No
    7 3/4 Env.(98.4x190.5mm) Yes No No No
    9 Env. (98x225 mm) Yes No No No
    Commercial #10 Env. Yes No No No
    (104.8x241.3 mm)
    C5 Env. (169x229 mm) Yes No No No
    C4 Env. Yes No No No
    B5 Env. (176x250 mm) Yes No No No
    DL Env. (110x220 mm) Yes No No No
    Other Env.(3)
    - 297x297 mm Yes No No No
    - 3.87x6.38 in to
    6.93x9.84 in Yes No No No
    Universal(1)(4)(5) Yes No No Yes
    Universal(2)(4)(5) Yes No No Yes
    Paper Yes Yes Yes Yes
    Transparencies Yes Yes No No
    Cardstock Yes No No No
    Glossy Paper No Yes No Yes
    Paper Labels Yes Yes No No
    Envelopes Yes No No No

    Note: (1) Size 69.85x127mm to 229x355.6mm (2.75x5 in. to 9.01x14 in.) 250-sheet Universal tray does not support index cards 400-sheet Universal tray supports paper no shorter than 7 in.
    Note: (2) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
    Note: (3) 98.3x162.1mm to 176.0x250.0mm (3.87x9.38 in. to 6.93x9.84 in.).
    Note: (4) When Universal is selected, the page is formatted for 215.9x355.6mm (8.5x14 in.) unless the size is specified by the software application.
    Note: (5) Narrow media should be loaded with the length in the feed direction (portrait).

    Output Media

    Standard (1) Finisher Finisher
    Face Down Face Up Face Up Face Down
    Paper Size & Type Output Bin Output Bin 1 Output Bin 1 Output Bin2
    ----------------------- ---------- ------------ ------------ ------------
    A4 (210x297 mm) Yes Yes Yes Yes
    Letter (8.5"x11") Yes Yes Yes Yes
    A5 (148x210 mm) Yes Yes Yes No
    B5-JIS (182x257 mm) No Yes Yes No
    B4-JIS (364x252 mm) Yes Yes Yes No
    Legal (8.5"x14") Yes Yes Yes No
    Executive (7.25"x10.5") Yes Yes Yes No
    Ledger (11"x17") Yes Yes Yes No
    Tabloid (11"x17") Yes Yes Yes No
    A3 (297x420 mm) Yes Yes Yes No
    12 x 18 (12"x18") Yes No Yes No
    11.69 x 36 (11.69"x36") Yes No Yes No
    7 3/4 Env.(98.4x190.5mm) No Yes No No
    9 Env. (98x225 mm) No Yes No No
    Commercial #10 Env. No Yes No No
    (104.8x241.3 mm)
    C5 Env. (169x229 mm) No Yes Yes No
    C4 Env. No Yes Yes No
    B5 Env. (176x250 mm) No Yes Yes No
    DL Env. (110x220 mm) No Yes Yes No
    Other Env.(6) No Yes Yes No
    Universal(2)(4)(5) No Yes Yes No
    Universal(3)(4)(5) No Yes Yes No
    Paper Yes Yes Yes Yes
    Transparencies No Yes Yes No
    Cardstock No Yes Yes No
    Glossy Paper No Yes Yes Yes
    Paper Labels No Yes Yes No
    Envelopes No Yes Yes No

    Note: (1) This is either the standard face up output bin or the finisher face up output bin if the finisher is installed, but not both.
    Note: (2) Size 69.85x127mm to 229x355.6mm (2.75x5 in. to 9.01x14 in.) 250-sheet Universal tray does not support index cards 400-sheet Universal tray supports paper no shorter than 7 in.
    Note: (3) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).
    Note: (4) When Universal is selected, the page is formatted for 215.9x355.6mm (8.5x14 in.) unless the size is specified by the software application.
    Note: (5) Narrow media should be loaded with the length in the feed direction (portrait).
    Note: (6) 98.3x162.1mm to 176.0x250.0mm (3.87x9.38 in. to 6.93x9.84 in.).

    Media Type and Weights Supported

    Input Media

    Standard High Capacity
    Print Media MPF Tray Feeder
    ----------------- ------------ ----------- -------------
    Copier/ 60-105 gsm 60-105 gsm 75-90 gsm
    Xerographic 16-28 lb 16-28 lb 20-24 lb

    Specialty Paper/ 106-120 gsm 106-120 gsm NS
    Glossy Laser 29-32 lb 29-32 lb

    Card Stock/ 121-216 gsm 121-216 gsm NS
    33-102 lb 33-102 lb

    Transparencies/ 175 gsm 175 gsm NS
    Color Laser 47 lb 47 lb

    Paper Labels 180 gsm 180 gsm NS
    Upper - Limit 48 lb 48 lb

    Banner Paper/ 90-165 gsm NS NS
    Xerographic 24-44 lb

    Envelopes 10 envelopes

    Note: NS = Not Supported.

    Output Media

    Finisher Finisher
    Standard Face Up Face Down
    Print Media Output Bin 1 Bin 2
    ----------------- ----------- ----------- -------------
    Copier/ 60-105 gsm 60-105 gsm 105-176 gsm (1)(2)
    Xerographic 16-28 lb 16-28 lb 28-47 lb

    Specialty Paper/ 106-120 gsm 106-120 gsm NS
    Glossy Laser 29-32 lb 29-32 lb

    Card Stock 121-216 gsm 121-216 gsm NS
    33-102 lb 33-102 lb

    Transparencies/ NS 175 gsm NS
    Color Laser 47 lb

    Paper Labels 180 gsm 180 gsm NS
    Upper - Limit 48 lb 48 lb

    Banner Paper/ 90 gsm 90 gsm NS
    Xerographic 24 lb 24 lb

    Envelopes NS 10 envelopes NS

    Note: NS = Not Supported.

    Note: (1) This is either the standard face up output bin or the finisher face up output bin if the finisher is installed, but not both.
    Note: (2) Maximum stapling size is 30 sheets of 75 gsm (20 lb) paper.

    Additional Media Guidelines

    Follow the media guidelines below for successful printing:

    Paper

    Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.

    Colored papers must be able to withstand 230 deg C (446 deg F) fusing temperature.

    Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the Infoprint Color 1567

    Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.

    Recycled paper less than 75 gsm (20 lb) may cause unacceptable results.

    Envelopes

    All envelopes should be new, unused, and without package damage.

    Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.

    Minimum weight: 90 g/m2 (24 lb.)

    The following envelopes should not be used:

    • Envelopes with windows, holes, perforations, cutouts, or deep embossing.
    • Envelopes with metal clasps, string ties, or metal folding bars.
    • Envelopes with exposed flap adhesive when the flap is in the closed position.
    • For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
    • Under high humidity conditions (over 60%), envelopes may seal during printing.

    Transparencies

    Use letter or A4-size sheets only.

    Transparencies specifically designed for xerographic copy machines or LED printers may be used with the Infoprint Color 1567.

    Labels

    Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.

    Media Size and Auto Size Sensing

    The Infoprint Color 1567 printer has the following sensors:

    Input Sensors
    Paper Size Paper Out Tray Low Tray Present
    --------------------- ---------- --------- -------- ------------
    Integrated 550-sheet Yes Yes Yes Yes
    Optional 550-sheet Yes Yes Yes Yes
    High Capacity Feeder No Yes Yes Yes
    Multipurpose Feeder No Yes No No
    Banner Media Tray No Yes No No

    Output Sensors
    Near Full Full Staple Empty Tray Present
    --------------------- --------- ------ ------------ ------------
    Standard 550-sheet No Yes No No
    Standard (Face Up) No No No Yes
    Finisher (Face Up) No No No No
    Finisher (Face Down) Yes Yes Yes Yes

    Network Compatibility

    The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:

    • TCP/IP
    • Novell (IPX/SPX including NetWare Directory Services)
    • AppleTalk**
    • LexLink** (DLC/LLC)

    The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:

    • IPP: Internet Printing Protocol
    • SLP: Service Location Protocol
    • NTP: Network Timing Protocol

    The printer with standard Ethernet internal and external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.

    IBM Host Connection Features

    iSeries (formerly AS/400)

    IBM iSeries with OS/400 V5R1 or later utilizing OS/400 Host Print Transform. Use Manufacturer Type and Model (MFRTYPMDL) of LEXOPTRAT** (in OS/400 Version 4 Release 2 or later), LEXOPTRAS**, or LEXOPTRA**.

    Security Features

    The Infoprint Color 1567 contains several standard and optional features and functions that improve or enhance the security of the device.

    Secure Management with MarkVision Professional

    Using the latest version of MarkVision Professional, administrators can configure and manage the Infoprint Color 1567 securely by using authenticated and encrypted network communications.

    Secure Network Communications

    The Infoprint Color 1567 contains support for several network protocols that increase the security of network communications.

    The addition of the SSL protocol allows for secure connections to the embedded web server in the device, which protects configuration and device status messages. SSL also provides the ability to perform secure Pull Printing.

    SNMPv3 support allows for encrypted and authenticated management traffic, protecting remote configuration and device status messages.

    IPSec (Internet Protocol Security) can be used with both IPv4 and IPv6 networks. IPSec provides encryption and authentication of communications at the network layer.

    Security Lockdown - When the adapter password has been set, an administrator can put the printer into "Security Lockdown" mode, where all insecure TCP and UDP ports are disabled (discovery and print ports remain open). TCP and UDP port numbers may also be closed individually.

    Confidential Print

    Using Confidential Print, a user may assign a PIN to a print job, and have the printer hold that job until the user physically arrives and enters the correct PIN. This will prevent another user from taking the printed output from the output bin.

    Several enhancements have been added to Confidential Print with the release of this and concurrent models:

    Job Expiration - An administrator can now configure the printer to automatically delete Confidential Print jobs after a specified amount of printer uptime. This time limit can be set to the following options: 1 hour, 4 hours, 24 hours, or 1 week.

    Increased PIN Digit Support - PIN numbers can now consist of four numbers between 0-9, providing 10,000 possible PIN combinations. Previous models supported four numbers from 1-6, with 1296 possible PIN combinations.

    Maximum Invalid PIN Attempts - An administrator can now configure the printer to automatically delete a Confidential Print job if the incorrect PIN number has been entered a specified number of times. This can be set to be between 2 and 10 invalid PIN attempts.

    Digitally Signed Firmware Update Files

    Upgraded firmware files from IBM are now signed with a digital signature, which verifies the source and authenticity of the updated code. This prevents a malicious user from creating and uploading to the printer custom code that could intercept and expose potential confidential data.

    Encryption for Optional Internal Hard Disk Drives

    When equipped with an optional internal hard disk drive, a printer could potentially store print job data, thus providing an avenue for a malicious user to retrieve the data. When "Disk Encryption" is enabled, a 128 bit encryption key is randomly generated and then used to encrypt all the data on the hard drive using the AES algorithm. This encryption key is unique to the printer that created it, therefore an encrypted hard drive could not be placed into another device and the data subsequently retrieved.

    Operator Panel Menu Lockout

    An administrator may apply a PIN number to protect the administration menus available through the printer operator panel. The following top-level menus can be protected using this feature:

    • Supplies
    • Paper
    • Reports
    • Settings
    • Security
    • Network/Ports
    • Help

    Printing Lockout

    When a hard disk is installed in the printer, the user has the option of locking the print device with a user defined PIN and preventing it from printing submitted jobs. All submitted print jobs will be stored on the internal hard drive until the printer is unlocked with the correct PIN. This feature will be especially useful in preventing printing after normal business hours.

    Note: Disk Encryption should also be enabled when using this feature to ensure that the data is stored securely in the event that the drive is removed to defeat Printing Lockout.

    IBM Infoprint Manager

    Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.

    Network Printer Resource Utility (NPRU)

    NPRU will not support the Infoprint Color 1567.

    TCP/IP Network Port Monitor Utility

    This utility will not support the Infoprint Color 1567.

    LPR Remote Printing Client Utility

    This utility will not support the Infoprint Color 1567.
    Physical Specifications

    Dimensions

    Width Depth Height Weight(1)
    Network --------- --------- --------- ----------
    Printer 695.0 mm 705.0 mm 512.0 mm 80.5 kg
    (27.4 in) (28.0 in) (20.2 in) (177.1 lb)

    Note: (1) Weights for low voltage and high voltage models are the same.

    Recommended clearances

    Left Right Front Back Top
    Network ---------- --------- ---------- --------- ---------
    Printer 330.0 mm 153.0 mm 686.0 mm 127.0 mm 229.0 cm
    (13.0 in.) (6.0 in.) (27.0 in.) (5.0 in.) (9.0 in.)

    Operating Environment

    Temperature: 10 to 33 C (50 to 91 F)

    Relative humidity: 20 to 80%

    Altitude: 0-2,300 meters (7,545 ft)

    Storage: printer & supplies:
    Temperature (degrees): 0 to 35 C (32 to 90 F)
    Relative humidity: 20% to 80%

    Shipping - printer & supplies:
    Temperature (degrees): -5 to 40 C (23 to 104 F)
    Relative humidity: 10% to 90%

    Electrical specifications

    Low voltage models
    120 - 127 VAC at 50 to 60 Hz nominal
    99-135 VAC extreme

    High voltage models
    220 - 240 VAC at 50/60 Hz nominal
    198 - 254 VAC extreme

    Power consumption

    Printing states 1567 n
    ------------------------------ ---------
    120 Volts
    Power Saver mode on 32 watts
    Standby Mode 275 watts
    Continuous printing 840 watts
    Maximum current while printing 8.5 amps

    220 Volts
    Power Saver mode on 32 watts
    Standby Mode 275 watts
    Continuous printing 840 watts
    Maximum current while printing 4.5 amps

    Note: All models are Energy Star compliant.

    Acoustics

    All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

    Network model:

    Sound Sound
    Mode Pressure dBA Power Bels
    --------------------------- ------------ ----------
    Ready 45 dBa 5.5 Bels
    Simplex Color Printing 53 dBa 7.0 Bels
    Simplex Black only Printing 55 dBa 7.0 Bels
    Duplex Printing (color or 55 dBa 7.0 Bels
    black only)
    All Options 57 dBa 7.2 Bels

    Software

    Printer drivers are provided on the Drivers, MarkVision, and Utilities CD that is packaged with the printer. See Publications section for details.

    The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.

    Operating Systems

    Infoprint 1532 is compatible with applications running under the following operating systems for either local or network connections: For information about USB connections, see Local Connections.

    Apple Macintosh
    Apple Mac OS 9.x .APPLE
    Microsoft Windows
    Microsoft Windows 95 4.00.950 or later
    Microsoft Windows 98, 1nd Edition
    Microsoft Windows 98, 2nd Edition
    Windows Me
    Microsoft Windows NT 4 SP6
    Microsoft Windows NT 4 Server SP6
    Microsoft Windows 2000 Professional
    Microsoft Windows 2000 Server
    Microsoft Windows 2000 Advanced Server
    Microsoft Windows 2000 Server running Terminal Services with: Citrix MetaFrame XP Presentation Server-Feature Release
    Microsoft Windows 2000 Server running Terminal Services with: Citrix MetaFrame Presentation Server-Feature Release
    Microsoft Windows 2000 Server running Terminal Services with: Citrix MetaFrame Presentation Server 4.0
    Microsoft Windows XP Home
    Microsoft Windows XP Professional
    Microsoft Windows Server 2003 Standard Edition
    Microsoft Windows Server 2003 Enterprise Edition
    Microsoft Windows Server 2003 running Terminal Server
    Microsoft Windows Server 2003 running Terminal Services with Citrix MetaFrame XP Presentation Server
    Microsoft Windows Server 2003 running Terminal Server with: Citrix MetaFrame XP Presentation Server 3
    Microsoft Windows Server 2003 running Terminal Server with: Citrix MetaFrame Presentation Server 4.0

    Novell
    Novell NetWare** 3.x, 4.x, 5.x, 6.x including full DNS and NDPS support
    Novel** Distributed Print ServicesTM (NDPS) 2.0 or later with with IBM NDPS IP Gateway
    Novel Open Enterprise Server for Netware with IBM Printing Solution

    Linux
    Shipped on Drivers and Utilities CD except Red Hat which is available on Web site:
    SuSE Linus Enterprise Server 8
    SuSE Linus Enterprise Server 9
    SuSE Linux Professional 9.0
    SuSE Linux Professional 9.1
    Red Hat Enterprise Linux 3 WS
    Linspire 4.5
    Debian 3.0 rev2
    Red Flag 4.0 (Simplified Chinese only)
    Limpus 9.2 (Traditional Chinese only)

    Download the Enhanced Printer Drivers from the IBM Web site.

    UNIX
    HP-UX 11.00, 11.11
    IBM AIX 5.1, 5.2, 5.3
    Sun Solaris SPARC 7, 8, 9, 10

    IBM AIX Colon Files

    IBM AIX 4.2.1, 4.3.3, 5.1, 5.2

    Other

    Virtually any platform supporting TCP/IP

    IBM iSeries Systems with TCP/IP with OS/400(R) V5R1 or later using OS/400 Host Print Transform

    The software applications that operate with most Apple LaserWriter printers will generally operate with the Infoprint Color 1567. The Macintosh 128, 512, and 512e Computers are not supported.

    Management Solutions (MarkVision**)

    MarkVision Professional and MarkVision Messenger are available via the Web at:
    www.markvisionprofessional.com

    MarkVision Professional

    MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

    MarkVision Messenger

    MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user

    The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances.

    Special Feature Codes -- Chargeable

    Mach Feature Part
    Type Model Number Number Description UPC
    ---- ----- ------- ------- ------------------------------ ---------------
    4935 n01 39V0008 Infoprint Color 1567 n NA (LV) 0-00435-76596-3
    39V0230 550-Sheet Drawer 0-00435-78312-7
    39V0231 550-Sheet Banner Media Tray 0-00435-78313-4
    39V0247 2x550-Sheet Drawer with Base 0-00435-78329-5
    39V0248 Duplex Unit 0-00435-78330-1
    39V0251 Printer Cabinet 0-00435-78377-6
    39V0252 Printer Base 0-00435-78378-3
    39V0232 High Capacity Feeder 0-00435-78314-1
    39V0249 Staple/Punch Finisher (3 hole) 0-00435-78375-2
    4935 n01 39V0324 Card for IPDS and SCS/TNe 0-00435-81949-9
    4935 n01 39V0325 Decryption Card 0-00435-81950-4
    4935 n01 39V0326 Serial Interface Card 0-00435-81951-2
    4935 n01 39V0327 Parallel 1284-B Iface Card 0-00435-81952-9

    Card for IPDS and SCS/TNe for Infoprint Color 1567

    With the Card for IPDS and SCS/TNe feature, you can print either host-based or client-based output on your network-attached laser printer. You can also use your printer for both network printing and for IBM eServer iSeries or mainframe jobs. Print bar codes, forms, publications, and graphics closer to your end users, giving you the associated cost and time savings from true distributed printing. Now you can direct your IBM AFP/IPDS or SCS output across the LAN using the TCP/IP protocol.

    Locate your printer wherever you need it to maximize its productivity. When connected to a network, an auto-emulation sensing printer will automatically switch to the proper document language, whether it is SCS, IPDS, PostScript, or PCL.

    Benefits for this feature include:

    Emulation of common IBM IPDS and SCS printers such as 4028 or 3812

    AFP/IPDS printing over the LAN using TCP/IP with a standard Ethernet network port

    TN3270E or TN5250E SCS (LU1) printing over the LAN using TCP/IP with Telnet with a standard Ethernet network port

    Decryption Card for Infoprint Color 1567

    The Decryption Card allows an equipped printer to receive and decrypt print jobs that have been encrypted using the decryption software on compatible client operating systems. Decryption supports AES encryption using key and block lengths of 128, 192, and 256 bits, providing robust security for sensitive documents. Decryption also supports the use of Session or dynamic encryption keys, which greatly reduces management overhead. Session keys are automatically and randomly generated with each print job, ensuring that a unique key is applied to each print job. For more information, please refer to the Decryption documentation.

    (P/N 39V0325) Decryption Card for Infoprint Color 1567
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This feature is installed in the flash memory/applications solutions slots.

    The Decryption feature allows an equipped printer to receive and decrypt print jobs that have been encrypted using the decryption software on compatible client operating systems. Decryption supports AES encryption using key and block lengths of 128, 192, and 256 bits, providing robust security for sensitive documents. Decryption also supports the use of Session or dynamic encryption keys, which greatly reduces management overhead. Session keys are automatically and randomly generated with each print job, ensuring that a unique key is applied to each print job. For more information, please refer to the Decryption documentation.

    (P/N 39V0324) Card for IPDS and SCS/TNe for Infoprint Color 1567
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This feature is installed in the flash memory/applications solutions slots.

    The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM servers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers

    IPDS is only supported for Single Byte Character Set and does not support Double Byte Character Set.

    Details on Card for IPDS and SCS/TNe Emulation

    Product Overview:

    The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident web server, a browser and the printer's IP address.

    For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.

    These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM iSeries applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).

    IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:

    PDF417 2D bar code, Data Matrix, MaxiCode 2D bar code support, QR code 2D barcode
    Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.
    Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
    No changes to host applications.
    Supports emulation of common IBM IPDS and SCS printers.

    Additional or new remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.
    One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or iSeries documents (AFP/IPDS, SCS).

    With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an iSeries or System/390 computer.

    With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or iSeries host printer. See the compatibility section for details.

    With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an iSeries or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the compatibility section for more details.

    For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.

    The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.

    The IPDS emulation supports the IPDS data and resource towers. SBCS fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.

    The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.

    Fonts

    AFP/IPDS Font and Typestyle Support:

    The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).

    The following languages are supported:
    Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English
    Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian
    Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian
    Greek
    Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.

    The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.

    The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.

    The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.

    The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.

    Font Capture

    Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.

    PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.

    Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.

    If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.

    The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.

    iSeries

    On the iSeries, Font capture is supported by OS/400 V5R2 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG/CHGPSFCFG), set FNTCAPTURE (*YES).

    Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Verify that *YES is specified for the Font Capture attribute. Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.

    For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.

    Mainframe (OS/390 or z/OS)

    Font capture is supported by PSF for OS/390 or z/OS. Use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.

    SCS Font and Typestyle Support

    The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.

    On the iSeries, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.

    A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.

    These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).

    Compatibility

    For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.

    Support Notes:
    Microcode updates and User's Guides are available from the IBM web site.
    See the appropriate User's Guide for configuration instructions.
    When the printer is emulating an IBM printer, the function supported depends on the IBM host software.

    For Direct Network Attachment - Hardware Compatibility

    When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:

    Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
    MarkNet(tm) N2000 Series print servers
    MarkNet X2000 Series print servers (AFP/IPDS only)
    MarkNet Pro print servers (AFP/IPDS only)

    The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.

    Notes:
    MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.
    For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.
    Any MarkNet X2000 microcode level provides AFP/IPDS support only.
    For IPDS printing, a minimum of 16MB of printer memory is required.

    Software Compatibility for AFP/IPDS Printing over TCP/IP

    The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:

    OS/400 V5R2 or later through PSF/400 (See Note).

    Note: With OS/400 V5R1, to print IPDS over TCP/IP through PSF/400.

    Software Compatibility for SCS LU1 Printing over TCP/IP

    The IBM iSeries software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:
    OS/400 V5R2 or later with all PTFs applied

    Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however, the SCS Menu options settings for all 4 sessions are the same.

    The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:
    IBM Communications Server (CS) for OS/390 or z/OS Version 2 Release 5 or later on ESA systems (Note: all appropriate APARs must be applied)
    TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)
    TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature
    Using Cisco 7500 Series Routers

    SCS LU1 Printing using a Gateway and TCP/IP

    If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or iSeries. Examples of these gateways are:
    IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp
    Microsoft NetResults SNA Server 4.0
    Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server
    Attachmate E-Vantage SNA Gateway 2.0
    Barr Systems Communications Server
    Cisco TN3270 Server
    OpenConnect using the WebConnect SNA Access Server or SNA Print Server

    Printer Features

    All printer features are customer installable.

    (P/N 39V0323) Bar Code Card
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This feature is installed in the flash memory/applications solutions slots.

    This feature prints over forty industry standard bar codes.

    The bar code card enables IBM's laser printers to print more than forty seven of the most popular industry-standard bar codes, including Datamatrix, QR Code, Aztec, microPDF417, PLANET, Codablock F, TF14, and HIBC128. The bar code card generates bar codes algorithmically for improved readability.

    The Bar Code Card emulates HP printers with an HP BarCodes & More font solution, JetCAPS BarDIMM, or JetCAPS BarSIMM (v.2.0b). p.The bar code card cannot be used in conjunction with the IPDS card or decryption card.

    (P/N 39V0326) Serial Interface Card
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This feature is installed in the local connection slot.

    This feature provides a serial port for the printer.

    (P/N 39V0327) Parallel 1284-B Interface Card
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This feature is installed in the local connection slot.

    This feature provides an IEEE 1284-B parallel port for the printer.
    Input, Output and Other Media Features

    (P/N 39V0230) 550-Sheet Drawer
    Minimum required = 0, maximum allowed = 3
    Prerequisite = none, Co-requisite = none

    This input option can be installed beneath the printer to offer an added input source which holds approximately 550 sheets of 20 lb. paper.

    (P/N 39V0231) 550-Sheet Banner Media Tray
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    The Banner Media Tray is an extension of the Multi Purpose Feeder. As an input tray, it will allow automatic feeding of up to 50 sheets of 24 lb banner paper. It also serves as an extension of the output tray, to hold the printed banner paper as it exits from the printer. The banner media tray is easily installed with two thumb screws. It features a fold-down tray for space savings when not in use. All media, which can be fed from the Multi Purpose Feeder, can be used when the Banner Media Tray is attached. The maximum input and output of banner paper supported by the Banner Media Tray is 50 sheets of 24 lb paper.

    (P/N varies by country) High-Capacity Feeder

    This feature has different part numbers by country due to the power cord.
    Minimum required = 0, maximum allowed = 1
    Prerequisite = Printer Cabinet or 2x550-Sheet Drawer with Base or two 550-Sheet Drawers and Printer Base, Co-requisite = none

    The Infoprint Color 1567 High Capacity Feeder (HCF) provides an additional input tray (Tray 3 or 5, depending on the configuration) with a total capacity of 3000 sheets (75 g/m2 / 20 lb., A4/Letter, plain paper). The HCF is installed by the customer to the right side of the printer. The input tray supports sensing for tray low and tray empty.

    Characteristics
    Capacity: 3000 sheets; 75 g/m2 (20 lb.) plain paper
    Media type support: paper, bond
    Does not support Cardstock, Transparency, Labels, or Envelopes
    The HCF includes its own line cord
    (P/N 39V0247) 2x550-Sheet Drawer with Base
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This input option includes two 550-sheet drawers and the printer base. It raised the printer to the correct height for the High-Capacity Feeder and/or Finisher to be installed.

    (P/N 39V0248) Duplex Unit
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This option offers two-sided printing capability.

    (P/N 39V0249) Staple/Punch Finisher (3 hole)
    Minimum required = 0, maximum allowed = 1
    Prerequisite = Printer Cabinet or 2x550-Sheet Drawer with Base or two 550-Sheet Drawers and Printer Base, Co-requisite = none

    See finisher description below.

    The Infoprint Color 1567 Finisher has two output bins with bin full and empty sensing (Bin 2 only) and supports stapling, hole punch and offset stacking. The Finisher is customer installable and attaches to the left side of the printer. Total output capacity is 1100 sheets: Bin 1 is 100 sheets and Bin 2 is 1000 sheets.

    Configuration

    Feeding - Bin 1 - straight path
    - Bin 2 - inverting path
    Inverting - Natural inverting for Bin 2 only
    Stacking - Bin 1 (face up)-100 sheets (A4/Letter 20 lb. TBLD/A3 20
    - Bin 2 (face down)-1000 sheets (A4/Letter 20 lb.)
    Punching - Bin 1 (face up)
    - Bin 2 (face down)
    Stapling - Bin 2 (face down) only
    - 30 deg single corner (flat clinch type)
    - 30 sheets stapling 75 gsm (20 lb.)
    Offsetting- Bin 2 (face down) only
    - 23 mm shift for stapled/non-stapled paper

    Operating Modes

    Mode Bin(1) Stacking Punching(2) Stapling(2) Offsetting
    ----- ------ ---------- ----------- ----------- ----------
    1 1 Face up
    2 1 Face up X
    3 2 Face down
    4 2 Face down X
    5 2 Face down X
    6 2 Face down X X
    7 2 Face down X
    8 2 Face down X X
    9 2 Face down X X
    10 2 Face down X X X

    Note: (1) Transparencies output to Bin 1 only.

    Note: (2) Transparencies not supported in this mode.

    Stapling
    Staple capacity: 3,000 staples
    Staple low sensing: No
    Staple out sensing: Yes
    Maximum packet size: 30 sheets (75gsm/20 lb. A4/Letter plain paper)
    Staple output tray: Finisher Bin 2 only

    Hole Punch

    Letter Size - Standard 3-hole punch
    A4 Size - Standard 4-hole punch
    Collector Box Present sensing - Yes
    Collector Box Full sensing - No
    Maximum packet size - Holes are punched one sheet at a time
    until tray is full
    Hole punch output tray - Finisher Bin 1 or 2

    Offset Stacking
    Offset stacking: 23mm
    Offset Tray output: Finisher Bin 2

    Offset stacking can be set in the printer for job or copy boundary. When multiple copies are selected in certain applications or operating environments, the document is sent multiple times to the printer and would be treated as separate print jobs.

    Finisher Limitations

    The Finisher requires installation of the 2x550 Drawer with Base bundle or Printer Cabinet

    Maximum paper size for Bin 2 is 8.5 in x 11 in (216mm x 279mm)

    Stapling may reduce output bin capacity

    The hole punch configuration is factory set and not user or field configurable

    The hole punch does not support transparency, labels or card stock

    When Finisher is attached, only long-edge fed envelopes wider than 148mm/5.8 inches (feed direction dimension) may be used. To print smaller envelopes, the finisher must be undocked during the job.

    The range of media weights, types and sizes supported by each of these options is described under Media Support. The maximum configuration of paper options supported by each printer model is also described within Media Support.

    (P/N 39V0251) Printer Cabinet
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This option attaches below the printer and raises the printer to the correct height for the High-Capacity Feeder and/or Finisher to be installed.

    (P/N 39V0252) Printer Base
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This option attaches below the printer and when used with two optional 550-sheet drawers, it raises the printer to the correct height for the High-Capacity Feeder and/or Finisher to be installed.

    Memory and Flash Memory Features

    The Infoprint Color 1567 has two slots for memory and flash memory features. A maximum of 1,024 MB of memory and 64 MB of flash memory is supported.

    Only one flash memory feature is allowed. If more than one flash feature is installed, the feature with the largest capacity is used.

    The memory features for the printer include:

    (P/N 76P6986) 128 MB SDRAM DIMM
    Minimum required = 0, maximum allowed = 2
    Prerequisite = none, Co-requisite = none

    (P/N 76P6987) 256 MB SDRAM DIMM
    Minimum required = 0, maximum allowed = 2
    Prerequisite = none, Co-requisite = none

    (P/N 76P6988) 512 MB SDRAM DIMM
    Minimum required = 0, maximum allowed = 2
    Prerequisite = none, Co-requisite = none

    The flash memory features for the printer include:

    (P/N 76P6989) 32 MB Flash DIMM
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    (P/N 76P6990) 64 MB Flash DIMM
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    If larger storage is required, an optional hard disk feature is also available.

    (P/N 75P5008) 20+GB Hard Disk with Adapter
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    The hard disk with adapter feature is required for a hard disk support. The adapter plugs into a disk interface slot and does not take up a memory or interface slot.

    Local Connections
    Internal Local Connection Features

    The Infoprint Color 1567 Printer has one interface slot that can be used for optional network connections or local connections.

    The following local connection options are supported:

    Cable Features

    (P/N 28P1871) 10 Ft. Parallel Cable
    Minimum required = 0, maximum allowed = no maximum
    Prerequisite = none, Co-requisite = none

    For parallel attachment, this cable is recommended for ten feet or less and may be ordered by the customer.

    (P/N 28P1875) 2-meter USB Cable

    Minimum required = 0, maximum allowed = no maximum
    Prerequisite = none, Co-requisite = none

    For USB attachment, this USB cable is recommended and may be ordered by ordered by the customer.

    Network Connection Features

    Network cards plug into the one interface slot. Only one Ethernet connection is allowed. If an Ethernet card in installed, it will disable the onboard Ethernet.

    (P/N 75P6992) Ethernet 1000BaseTX
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    This feature provides a Gigabit Ethernet port.

    (P/N 75P6857) 802.11g Wireless to Ethernet
    Minimum required = 0, maximum allowed = 1
    Prerequisite = network model or Ethernet feature, Co-requisite =none

    This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11g wireless standard. This standard operates at speeds of up to 54 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building construction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.

    The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.

    (P/N 75P6854) 802.11g Wireless to USB
    Minimum required = 0, maximum allowed = 1
    Prerequisite = network model or Ethernet feature, Co-requisite =none

    This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11g wireless standard. This standard operates at speeds of up to 54 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building construction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.

    The feature is an external adapter that connects to the standard USB port on the printer.
    Network Cards for External Print Servers Features

    Theses external features plug into a parallel or serial port on the printer.

    (P/N 28P1839) Ethernet 10BaseT/100BaseTX-1 port
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none

    (P/N 28P1836) Token Ring-3 port
    Minimum required = 0, maximum allowed = 1
    Prerequisite = none, Co-requisite = none


    Note: (1) Exact print speed varies depending on document complexity, system configuration, software applications, driver, and printer status.

    Trademarks

    (R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
    ** Company, product, or service name may be a trademark or service mark of others.
    Windows is a trademark of Microsoft Corporation.
    UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited. IBM Corporation 2005.


    About us | Dynamic Testimonials | Employment | Site Map
    Copyright(c) 2006-2018 Argecy Computer Corporation - All rights reserved